DBox read-only?

Pages: [1]

« previous next »

Author

Topic: DBox read-only? (Read 4394 times)

Tirbsi

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	DBox read-only? « on: July 06, 2017, 02:35:29 AM »

Hi,
I have a DBox ECU, where obviously a new 29F800 with a tune was soldered in. I was able to read the ECU via MPPS and Galletto Bootmode.

When I try to write a stock MBox file on it, Galletto1260 and V54 showing writing error at 0%. MPPS and Kess are also not able to write.

Could it be, that the soldered flash has some kind of write protection?

Regards,
Patrick


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: DBox read-only? « Reply #1 on: July 06, 2017, 09:54:45 AM »

By d-box I assume you mean 8D0907551D?

If so, nothing on the flash can prevent boot mode flashing from working, unless somebody physically lifted the write pin.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2802

	Re: DBox read-only? « Reply #2 on: July 06, 2017, 02:18:55 PM »

Quote from: Tirbsi on July 06, 2017, 02:35:29 AM


	Logged

Giving your mom a tuneup

Tirbsi

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: DBox read-only? « Reply #3 on: July 07, 2017, 01:01:30 AM »

Quote from: nyet on July 06, 2017, 09:54:45 AM

By d-box I assume you mean 8D0907551D?

If so, nothing on the flash can prevent boot mode flashing from working, unless somebody physically lifted the write pin.

Yes, Euro S4 8D0907551D

which one is the write pin?
Could the EEPROM prevent bootmode flashing?

@marty, I tried bootmode on my desk. Reading works, writing not...


	Logged

Tirbsi

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: DBox read-only? « Reply #4 on: July 07, 2017, 07:57:44 AM »

The Chip does not seem to be 29f800 but PA28F800. Could this be the reason?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: DBox read-only? « Reply #5 on: July 07, 2017, 10:04:52 AM »

Should be fine unless it is defective or on a riser (obviously).


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: DBox read-only? « Reply #6 on: July 07, 2017, 10:06:46 AM »

Someone else having issues with that flash P/N:

http://nefariousmotorsports.com/forum/index.php?topic=7344.msg67949#msg67949


	Logged

Tirbsi

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: DBox read-only? « Reply #7 on: July 07, 2017, 10:29:31 AM »

Quote from: nyet on July 07, 2017, 10:06:46 AM

Someone else having issues with that flash P/N:

http://nefariousmotorsports.com/forum/index.php?topic=7344.msg67949#msg67949

Yes, it is exactly the same issue. Galletto says "Erasing...OK" and then "Writing...Error". Reading is still possible, so nothing is erased...
The Chip is not on a riser, but directly soldered.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 12:34:49 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search