NefMoto > Technical > Flashing and Chipping > DBox read-only?
Pages: [1]
« previous next »
Author Topic: DBox read-only?  (Read 3921 times)
Tirbsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25
« on: July 06, 2017, 02:35:29 AM »
Hi,
I have a DBox ECU, where obviously a new 29F800 with a tune was soldered in. I was able to read the ECU via MPPS and Galletto Bootmode.

When I try to write a stock MBox file on it, Galletto1260 and V54 showing writing error at 0%. MPPS and Kess are also not able to write.

Could it be, that the soldered flash has some kind of write protection?

Regards,
Patrick
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #1 on: July 06, 2017, 09:54:45 AM »
By d-box I assume you mean    8D0907551D?

If so, nothing on the flash can prevent boot mode flashing from working, unless somebody physically lifted the write pin.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
_nameless
Hero Member
*****

Karma: +320/-448
Offline Offline

Posts: 2672
« Reply #2 on: July 06, 2017, 02:18:55 PM »
Quote from: Tirbsi on July 06, 2017, 02:35:29 AM
Hi,
I have a DBox ECU, where obviously a new 29F800 with a tune was soldered in. I was able to read the ECU via MPPS and Galletto Bootmode.

When I try to write a stock MBox file on it, Galletto1260 and V54 showing writing error at 0%. MPPS and Kess are also not able to write.

Could it be, that the soldered flash has some kind of write protection?

Regards,
Patrick
pull the ecu and see whats up. could always bootmode or chip burner


Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Tirbsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25
« Reply #3 on: July 07, 2017, 01:01:30 AM »
Quote from: nyet on July 06, 2017, 09:54:45 AM
By d-box I assume you mean    8D0907551D?

If so, nothing on the flash can prevent boot mode flashing from working, unless somebody physically lifted the write pin.

Yes, Euro S4 8D0907551D

which one is the write pin?
Could the EEPROM prevent bootmode flashing?




@marty, I tried bootmode on my desk. Reading works, writing not...
Logged
Tirbsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25
« Reply #4 on: July 07, 2017, 07:57:44 AM »
The Chip does not seem to be 29f800 but PA28F800. Could this be the reason?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #5 on: July 07, 2017, 10:04:52 AM »
Should be fine unless it is defective or on a riser (obviously).
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #6 on: July 07, 2017, 10:06:46 AM »
Someone else having issues with that flash P/N:

http://nefariousmotorsports.com/forum/index.php?topic=7344.msg67949#msg67949
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Tirbsi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25
« Reply #7 on: July 07, 2017, 10:29:31 AM »
Quote from: nyet on July 07, 2017, 10:06:46 AM
Someone else having issues with that flash P/N:

http://nefariousmotorsports.com/forum/index.php?topic=7344.msg67949#msg67949



Yes, it is exactly the same issue. Galletto says "Erasing...OK" and then "Writing...Error". Reading is still possible, so nothing is erased...
The Chip is not on a riser, but directly soldered.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 19, 2024, 04:46:36 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)