Pages: 1 2 [3]
Author Topic: 8N906018AT Immo Off help please  (Read 16465 times)
jolidj
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 54


« Reply #30 on: August 22, 2017, 03:15:51 AM »

yes right, you need to remoove all of this aftermarket immo .after you see all file we send on this post work fine.
Logged
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178



« Reply #31 on: December 22, 2020, 11:14:58 AM »

Read in 512bytes
EEPROM Status:
- Type: ECU_eeprom
- Version: Immo2
- VIN: XXXXXXXXXXXXXXXXX
- SKC: 065535
- Immobiliser: Error, set Immo - Current values: 0x12 = 0x04, 0x22 = 0x04
- Checksum: OK
- Size: 512bytes
- Cluster Code: 00 00 00 00 00 00 00
- P0601 DTC: not set
- Immo ID: XXXXXXXXXXXXXX
- Softcoding ID: 6710
- Tuner Tag:
- Flash Programming (successful): 1
- Flash Programming (attempts): 0
 what happened here? how was this flashed hrmm i had this happend to me with nef moto my first run.
Logged

W357
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #32 on: December 22, 2020, 01:50:01 PM »

Read in 512bytes
EEPROM Status:
- Type: ECU_eeprom
- Version: Immo2
- VIN: XXXXXXXXXXXXXXXXX
- SKC: 065535
- Immobiliser: Error, set Immo - Current values: 0x12 = 0x04, 0x22 = 0x04
- Checksum: OK
- Size: 512bytes
- Cluster Code: 00 00 00 00 00 00 00
- P0601 DTC: not set
- Immo ID: XXXXXXXXXXXXXX
- Softcoding ID: 6710
- Tuner Tag:
- Flash Programming (successful): 1
- Flash Programming (attempts): 0
 what happened here? how was this flashed hrmm i had this happend to me with nef moto my first run.

Do you have the Stock EEPROM?

I normally use DIFF write 2x on my cars to make sure they start.
Logged
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178



« Reply #33 on: December 22, 2020, 02:57:38 PM »

Do you have the Stock EEPROM?

I normally use DIFF write 2x on my cars to make sure they start.
the original eeprom was posted at the start of the thread says its original looks like it was tinkered with.
Logged

W357
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)