Pages: [1]
Author Topic: 1.8T M3.8.3 tuning  (Read 5361 times)
Gaz Tuning
Newbie
*

Karma: +0/-13
Offline Offline

Posts: 16


« on: July 14, 2017, 02:01:28 AM »

can anyone help me with 3.8.3 file to tune
AGU engine i have changed fuel injectors to 386cc and k04 Turbocharger
i need tuning file for this setup

SN  1037352127
HN  0261206518

06A906018CG
Logged
_nameless
Hero Member
*****

Karma: +374/-3442
Online Online

Posts: 3005



« Reply #1 on: July 14, 2017, 06:44:00 AM »

Injector constant is Grundanpassungskonstante, tune it using the physical formula.
You know the stock injector flow and fuel pressure, after you fit the new injectors (and/or FPR), recalculate the flow and adjust the constant. It is linear. Don't forget to adjust injector lag time.
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
Gaz Tuning
Newbie
*

Karma: +0/-13
Offline Offline

Posts: 16


« Reply #2 on: July 14, 2017, 10:47:56 AM »

There was

205cc 4 bar stock injector 
K03 stock turbo
Logged
eliotroyano
Hero Member
*****

Karma: +50/-23
Offline Offline

Posts: 838


« Reply #3 on: July 14, 2017, 06:14:24 PM »

I will take a look to maf flow and load values too. Maybe a bigger MAF will improve ECU resolution at higher than normal boost values and smooth transients.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.701 seconds with 14 queries. (Pretty URLs adds 0s, 0q)