Pages: [1]
Author Topic: ME7.5 DBW -> DBC conversion?  (Read 5446 times)
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565


« on: December 20, 2011, 02:31:13 PM »

There's has to be a way to setup a ME7.5 box to just use a DBC TB. Disabling some of the functions.

any insight?

Thanks,
Rey
Logged
rayce
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 66


« Reply #1 on: December 22, 2011, 08:38:03 PM »

Just curious why not DBW?
Logged

04 TT 225BEA Quattro
68 T1 VW Street Rail 2.5 Turbo 18psi 1300lbs
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565


« Reply #2 on: December 23, 2011, 09:37:33 AM »

For all those wideband 1.8T swaps into earlier cars (mk1/2/3). It would be a lot easier if they could retain the throttle cable and use an AEB or AEG TB.

I have one in my garage I'd love to use a wideband ECU but don't want to install a DBW pedal.
Logged
acab
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #3 on: March 19, 2016, 03:36:48 PM »

i want implement me75 to other car, does anybody know, how to work with dbc?
all hardware work fine, but need ecu
Logged
byzan a4
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 73


« Reply #4 on: March 26, 2016, 05:20:57 PM »

Id use the PFL s4 or early Ibiza throttle pot on a bracket at the end of the cable. You can place it where you like within reason and adapt the bracket to keep the ratio correct on peddle operation v pot rotation .
Logged
Vdub-dub
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 136


« Reply #5 on: April 18, 2016, 12:29:20 PM »

Just curious why not DBW?

seems alot of work to go backwards especially on me7.5
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)