Hello,
Sorry for adding it in old post another person but it is corresponding to prenis mod.
Is somebody able to check my mod? I made my file comparing to prenis mods. Pops and bangs sounds well during driving, i mean really nice and not so loud (it depends from exhaust exactly).
Now car accelerates really really better but appears limp mode and fault 00575  (pressure not reached).
Could somebody help and check these load maps? m3.8.3 world is not well known for me, in my area lots of diesels.
Boost gauge shows 1bar boost during accelerating, then goes to limp mode ( drops down to around 0,5bar) around 4100rpm, when i leave gas pedal and press one more time the boost reaches 1bar and goes into limp mode (0,5bar) around 5600rpm.
Sollwert is too high?
Thank you in advance.
06a906018R
M3.8.3

Yes i've done it this way when i saw that nobody want to comment it and car runs well on 0.95bar.
Thank you for interest.

Your map look weird, think you have define some maps wrong (:

DLPN.1 has a random number in the middle
KFZWOPT.0 you changed the axis to go from -6.8ms to 8ms
KFZWMN you changed between 4ms to 5.6ms
DKLDSPN.0 you increased to 49.86%