Pages: [1]
Author Topic: Logging ME7.9.10  (Read 10855 times)
slickkon
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 20


« on: August 25, 2017, 03:52:31 AM »

Hi all, need some guidance on how to go about logging for me7.9.10?

I tried multiecuscan, but am unable to see the spark advance and log knocks. Tried Setzi's me7logger, but can't seem to load the original me7.9.10 bin. Comes up with some error being wrong checksum or file length.

Really appreciate the help!

Kind regards,
Mat
Logged
slickkon
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 20


« Reply #1 on: August 25, 2017, 05:37:05 AM »

can anyone please help point me in the right direction? maybe use another program? thanks all!

Kind regards,
Mat
Logged
woj
Hero Member
*****

Karma: +43/-3
Offline Offline

Posts: 500


« Reply #2 on: September 17, 2017, 08:12:27 AM »

Should have noticed this Wink Seems MES is the only option out of the ready made programs, and as much as I appreciate the program and the effort, when it comes to logging it sucks, mostly because of the speed / resolution. And I did not even know that it also has problems logging some parameters.

Otherwise, you are left with writing your own one. Spying on the MES traffic helps in figuring out the parameter codes, otherwise it's just interfacing the ELM327, not too difficult.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600


« Reply #3 on: November 28, 2022, 02:17:21 AM »

Will vcds eobd mode work to log?
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070


« Reply #4 on: November 28, 2022, 02:59:49 PM »

VehiCal logs it as far as I can remember.
Logged

I have no logs because I have a boost gauge (makes things easier)
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600


« Reply #5 on: November 29, 2022, 03:07:44 AM »

i checked before posting my vcds question and found no me7.x
https://docs.vehical.net/logger_protocols
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 16 queries. (Pretty URLs adds 0s, 0q)