cannot slow init?

Pages: [1]

« previous next »

Author

Topic: cannot slow init? (Read 10177 times)

Coupee36

Newbie

Karma: +1/-0
Offline

Offline

Posts: 4

	cannot slow init? « on: December 25, 2011, 10:29:41 AM »

I have a generic BLUE VagCom Cable. trying to connect to my 98 b5 a4 audi. VagCom 409-1 connects fine. Here is the log for nefmoto.

Code:

25/Dec/2011 08:50:11.159: USER: Starting slow init connection.
25/Dec/2011 08:50:13.763: USER: Connecting to address 0x01.
25/Dec/2011 08:50:15.986: LOG: Read incorrect sync byte, guessing baud rate is actually 9600.
25/Dec/2011 08:50:16.066: USER: Slow init succeeded.
25/Dec/2011 08:50:16.066: LOG: Setting Address: 0x01 KeyByte1: 0x01 KeyByte2: 0x0A
25/Dec/2011 08:50:16.376: LOG: KWP1281 read block
25/Dec/2011 08:50:16.477: LOG: KWP1281 sent block
25/Dec/2011 08:50:16.787: LOG: KWP1281 read block
25/Dec/2011 08:50:16.897: LOG: KWP1281 sent block
25/Dec/2011 08:50:17.178: LOG: KWP1281 read block
25/Dec/2011 08:50:17.278: LOG: KWP1281 sent block
25/Dec/2011 08:50:17.438: LOG: KWP1281 read block
25/Dec/2011 08:50:17.518: LOG: KWP1281 sent block
25/Dec/2011 08:50:17.588: LOG: KWP1281 read block
25/Dec/2011 08:50:17.688: LOG: KWP1281 sent block
25/Dec/2011 08:50:17.688: USER: KWP1281 connect info: 4D0907551AH 2.8L V6/5V  MOTR HS D01 0r#
25/Dec/2011 08:50:19.190: USER: Connecting to address 0x01.
25/Dec/2011 08:50:21.414: LOG: Read incorrect sync byte, guessing baud rate is actually 9600.
25/Dec/2011 08:50:21.494: USER: Slow init succeeded.
25/Dec/2011 08:50:21.494: LOG: Setting Address: 0x01 KeyByte1: 0x01 KeyByte2: 0x0A
25/Dec/2011 08:50:21.804: LOG: KWP1281 read block
25/Dec/2011 08:50:21.904: LOG: KWP1281 sent block
25/Dec/2011 08:50:22.215: LOG: KWP1281 read block
25/Dec/2011 08:50:22.295: LOG: KWP1281 sent block
25/Dec/2011 08:50:22.595: LOG: KWP1281 read block
25/Dec/2011 08:50:22.675: LOG: KWP1281 sent block
25/Dec/2011 08:50:22.846: LOG: KWP1281 read block
25/Dec/2011 08:50:22.946: LOG: KWP1281 sent block
25/Dec/2011 08:50:23.016: LOG: KWP1281 read block
25/Dec/2011 08:50:23.106: LOG: KWP1281 sent block
25/Dec/2011 08:50:23.106: USER: KWP1281 connect info: 4D0907551AH 2.8L V6/5V  MOTR HS D01 0r#
25/Dec/2011 08:50:24.598: USER: Connecting to address 0x11.
25/Dec/2011 08:50:27.432: LOG: Failed to read sync byte, guessing baud rate is actually 9600.
25/Dec/2011 08:50:27.482: LOG: Not enough key bytes, read: 0
25/Dec/2011 08:50:27.502: USER: Slow init failed.
25/Dec/2011 08:50:27.502: USER: Disconnected
25/Dec/2011 08:50:27.542: LOG: Setting communication timings to defaults.
25/Dec/2011 08:50:27.562: LOG: Closing FTDI device.
25/Dec/2011 08:50:27.572: LOG: Send receive thread now terminated.


	Logged

Coupee36

Newbie

Karma: +1/-0
Offline

Offline

Posts: 4

	Re: cannot slow init? « Reply #1 on: December 25, 2011, 10:35:10 AM »

this is the cable i am using.

http://www.amazon.com/gp/product/B005WGIN5G/ref=oh_o00_s00_i00_details


	Logged

Tony@NefMoto

Administrator
Hero Member

Karma: +132/-4
Offline

Offline

Posts: 1389

2001.5 Audi S4 Stage 3

	Re: cannot slow init? « Reply #2 on: January 03, 2012, 03:29:18 PM »

It's possible that the 1998 B5 A4 doesn't support the KWP2000 protocol.

VagCom uses the KWP1281 protocol to connect, which is why it may work.


	Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto

Tony@NefMoto

Administrator
Hero Member

Karma: +132/-4
Offline

Offline

Posts: 1389

2001.5 Audi S4 Stage 3

	Re: cannot slow init? « Reply #3 on: January 05, 2012, 05:14:35 PM »

One more test you could do is to try to connect using the MonoScan software. It uses the older KWP1281 protocol.


	Logged

robin

Full Member

Karma: +20/-1
Offline

Offline

Posts: 139

	Re: cannot slow init? « Reply #4 on: January 23, 2012, 12:46:58 PM »

That's an older ECU that doesn't support KWP2000.


	Logged

herrakani

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: cannot slow init? « Reply #5 on: April 14, 2012, 08:35:51 AM »

I have the same problem, Audi A4B5. MonoScan doesn't either work.
Just gives timeout errors.


	Logged

Gonzo

Sr. Member

Karma: +21/-30
Offline

Offline

Posts: 483

	Re: cannot slow init? « Reply #6 on: April 15, 2012, 08:49:19 AM »

98 and 99 are not ME7


	Logged

herrakani

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: cannot slow init? « Reply #7 on: April 16, 2012, 07:05:22 AM »

Uh oh. Nice to know.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 12:24:10 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search