NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Dumb question
Pages: [1]
« previous next »
Author Topic: Dumb question  (Read 4532 times)
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27
« on: September 26, 2017, 03:53:48 AM »
I'm trying to perform an immo off with the ME7 EEPROM programmer, and it reads just fine, but I for the life of it cannot find where is the read file???
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #1 on: September 26, 2017, 04:22:33 AM »
Wherever the EXE is and whatever name you gave it.
Logged
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27
« Reply #2 on: September 26, 2017, 04:30:07 AM »
Quote from: adam- on September 26, 2017, 04:22:33 AM
Wherever the EXE is and whatever name you gave it.

well that's what I thought would happen, but it didn't. figured out that I should just put a 'C:\' before the bin name and there it was.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #3 on: September 26, 2017, 04:31:15 AM »
Just run CMD with admin privilegs so it is allowed to write the file to your c drive.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #4 on: September 26, 2017, 04:59:23 AM »
Paste the output of the CMD window.
Logged
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27
« Reply #5 on: September 26, 2017, 07:41:37 AM »
Quote from: adam- on September 26, 2017, 04:59:23 AM
Paste the output of the CMD window.
Everything is literally fine, just the file wouldn't show up this way.

C:\WINDOWS\system32>C:\dokumenti\me7\me7_95040.exe --OBD -r -p 4 95040.bin
Ver: 1.30
Com Port: 4
Baud Rate: 10400
Opening COM4 ... OK
Initiating communication ... OK
ECU ID response: 022906032AR
                 MOTRONIC ME7.1  G
                 0004
Reading EEPROM .............................................................. OK
File saved
Closing COM4

I fixed it by changing it to "me7_95040.exe --OBD -r -p 4 c:\95040.bin", so now I can find the file right under the c: drive
The solution found its way!
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #6 on: September 26, 2017, 08:04:16 AM »
Before you did this the file should have been saved here:
C:\dokumenti\me7\
Logged
GatisGirdenis
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27
« Reply #7 on: September 26, 2017, 08:27:31 AM »
Quote from: aef on September 26, 2017, 08:04:16 AM
Before you did this the file should have been saved here:
C:\dokumenti\me7\

I would've guessed so, but it did not. Maybe it has something to do with Windows 10 64-bit, but doubtful. At least I found a work around, which worked fine.  Smiley
Logged
SB_GLI
Hero Member
*****

Karma: +116/-10
Offline Offline

Posts: 1022
« Reply #8 on: September 26, 2017, 10:32:38 AM »
Quote from: aef on September 26, 2017, 08:04:16 AM
Before you did this the file should have been saved here:
C:\dokumenti\me7\

probably wrote to the current dir, which was C:\WINDOWS\system32
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #9 on: September 26, 2017, 01:16:36 PM »
CD first.

So:
cd c:\users\....
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 09:50:39 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)