Pages: [1]
Author Topic: Audi TT BDB 3.2 swap to mk4 with mk4 gen ecu  (Read 3201 times)
tonytony232
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 26


« on: October 05, 2017, 06:50:37 AM »

hey guys) let me introduce my project...
So, i have swaped 3.2 BDB from audi to my mk4 golf, there's some problems with ecu and I also have swaped mk4 ecu, but as we know on mk5 gen 3.2 is another outlet camshaft I have changed it by another one from porsche cayenne 3.2

engine is running pretty well now, vvt is fully working...
about 2 months I'm searching damos for Audi TT mk1 file, R32 damos isn't working with audi file and I make my own project ols file ... here is attached file (I have find a lot of main maps) and if somebody can help me to find NMAX and NMAXOG .....)))))
also i need to delete some DTC-s and if somebody can do it for me i will post which DTC...

Hope, my project will helpfull for u guys)
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #1 on: October 11, 2017, 04:15:59 PM »

Ok im confused, what ecu are you using? mk4 mk5 or audi tt?
Logged
norbi
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25


« Reply #2 on: October 13, 2017, 09:35:50 AM »

i think nmax: 16932 nmaxog: 16948 dtc table start: 1C000 Smiley
but it strange file, what problem with rpm you have?
Logged
tonytony232
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 26


« Reply #3 on: December 06, 2017, 12:27:11 PM »

Ok im confused, what ecu are you using? mk4 mk5 or audi tt?

ME7.1.1 from 2003 cayenne with audi tt flash
Logged
tonytony232
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 26


« Reply #4 on: December 06, 2017, 12:29:38 PM »

i think nmax: 16932 nmaxog: 16948 dtc table start: 1C000 Smiley
but it strange file, what problem with rpm you have?

any problem. just need to make rev above 6800... 7000 or 7200
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)