Pages: [1]
Author Topic: Golf 4 2.3 V5  (Read 6138 times)
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« on: November 02, 2017, 01:51:28 PM »

I search many in this forum and others but I cant find similar dump like this.In Winols I cant syncronize with other dump..Please when you have correct definition to this dump share with me. BOSCH ME7.1
ECU-NR:066906032AG
0261207375

SW:362307

Logged
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #1 on: November 08, 2017, 11:17:19 AM »

I will help you finding your needed maps this afternoon. Wink
Don't contact me via private message again, so others could learn. Wink
[/quote

Thank you for helping,engine is in his place,ready to start Smiley
Logged
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #2 on: November 08, 2017, 02:16:38 PM »

First of all:
What maps do you need?

For me is enough for disable cat and second lamda,evap,secondary airpump,and canbus off(IC,ABS)and DTC table.That is not a small work,I know.
Logged
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #3 on: November 08, 2017, 03:18:16 PM »

For me is enough for disable cat and second lamda,evap,secondary airpump,and canbus off(IC,ABS)and DTC table.That is not a small work,I know.

The DTC off I can understand how it work,thanks for good description for Tony
Logged
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #4 on: November 09, 2017, 10:59:38 AM »

The DTC off I can understand how it work,thanks for good description for Tony

For search for dtc:Errorclasstable at 106E3,VAG errorclasstable at 14644 in this dump
Logged
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #5 on: November 09, 2017, 01:39:50 PM »

Disable rear cat DTC:
CWDLSAHK is at 185A3
CDKAT is somewhere at 181A2


Disable SAI DTC:
CDSLS is at 181B0
CWKONABG is at 181BA
MSLUB is at 1A3A2
MSLBAS is somewhere at 1838F


It wasn't a big deal finding these with a basic Me7.5 and Me7.1 definition, you just have to find the correct offset...

I've got the maps from here...
https://s4wiki.com/wiki/Tuning#DTC_disables



Some bytes are nearly to his description,some are far away,so this is not clear to me.
Logged
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #6 on: November 09, 2017, 01:59:35 PM »

You know that every ecu is different?

There are even differences between the Me7.1 ecu's of a 2.3 V5.  Roll Eyes

=> I took your file
=> Imported it into WinOls
=> Opened a Me7.5 defintion next to it
=> Aligned both windows
=> And searched for correct offsets with help of the search function
=> For some offsets I needed a Me7.1 definition
=> That's what came out, the offsets I found were pretty good and clear

You can search yourself again if you want...  Roll Eyes


Thank you for patience to me,I search sure,my plan is to learn that type ecu.
Logged
banoo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #7 on: November 09, 2017, 03:37:32 PM »

Me7.1 I have similar,but me7.5 what piece you open?send me please the link,I cant this make bad Cheesy
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)