Pages: [1]
Author Topic: A4 B6 1.8T ecu chip  (Read 4232 times)
vilsson
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« on: November 10, 2017, 12:17:16 AM »

Hi, opened my Audi A4 B6 1.8t ecu to flash it in boot mode. But noticed that its already modified (soldered chip). Any idea what chip this might be? Do I get this in boot mode same way by grounding pin 24?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: November 10, 2017, 12:21:30 AM »

No. Remove the riser, solder on a blank flash, bootmode flash to stock.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630


« Reply #2 on: November 10, 2017, 06:45:31 AM »

Or if your SMD soldering skills isn't that great,
you could buy a spare ecu and tune on that instead.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #3 on: November 10, 2017, 07:03:42 AM »

hot air
easy
Logged

Giving your mom a tuneup
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #4 on: November 10, 2017, 07:05:50 AM »

On an ABT ecu I had I could just put it into bootmode by grounding the extra pad that is linked to pin24. Dont know if I would be able to flash over it, didnt try, but I think so. It read just fine. (if you are curious, it was not good...)
Logged

vilsson
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #5 on: November 10, 2017, 08:34:46 AM »

Thanks. I have a spare ecu that is already tuned so I can use that if something goes wrong. I think that chip is MTM. Tune with bigger injectors.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)