Pages: [1]
Author Topic: 4b0906018DH_0004 0261207928 1037366497  (Read 7425 times)
Akisman1
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7


« on: January 04, 2012, 04:20:21 PM »

Hi there,

Today i downloaded from my ecu the bin file using kwp2000.
Does this seems correct to you?
Could somebody check it?
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #1 on: January 04, 2012, 07:24:08 PM »

I think the file supposed to have 1024kb, but I couldn't tell you what's wrong, or different with this file?
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350


« Reply #2 on: January 04, 2012, 10:43:29 PM »

file = garbage

Better try another interface, like vagcomdongle+nefmoto-soft or mpps.

What software did you use to read it out ? the speial ME7edition software from AMT-cartech ?

Logged
Akisman1
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7


« Reply #3 on: January 05, 2012, 02:25:30 PM »

I used the VAGME7 Flasher.
I guessed from the size that it should be garbage but i wasn't sure.
Thanks for the answers, will try the vag com interface when i recieve it Smiley
Logged
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350


« Reply #4 on: February 04, 2012, 12:46:58 PM »

time to do it on the bench. I always get good results on the bench with kwp2000+ VAGME7 Flasher.
or try to remove cluster-fuses.

You can also try nefmoto. Let us know / post the readout please.

Thanks,

PvL
Logged
Akisman1
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7


« Reply #5 on: February 05, 2012, 10:43:44 AM »

time to do it on the bench. I always get good results on the bench with kwp2000+ VAGME7 Flasher.
or try to remove cluster-fuses.

You can also try nefmoto. Let us know / post the readout please.

Thanks,

PvL


So i tried a different interface and here is what file i got:

Logged
carlossus
Sr. Member
****

Karma: +38/-0
Offline Offline

Posts: 394

Leon Curpa Stg1+


« Reply #6 on: February 05, 2012, 11:51:02 AM »

Looks good.

==============================================================================
ME7Check v1.11 (c) mki, 06/2004-07/2011
Checking file C:\Users\carl\Desktop\superboriginal.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 40/1/ME7.5/3/4016.31//24G/Dst04o/080802//
-> Contents of ECUID data table:
   - '0261207928'         (SSECUHN)
   - '1037366497'         (SSECUSN)
   - '4B0906018DH '       (VAG part number)
   - '0004'               (VAG sw number)
   - '1.8L R4/5VT    '    (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'


-> No errors found. File is OK.   *********************
Logged
Akisman1
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7


« Reply #7 on: February 05, 2012, 05:02:31 PM »

Great! Thanks!
Maybe could someone figure why my boost was playing from 0.4 to 1 bar after 5500 rpm?
Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #8 on: February 06, 2012, 08:38:34 AM »

Please post in the correct section...
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
Akisman1
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7


« Reply #9 on: February 07, 2012, 01:01:09 AM »

Please post in the correct section...

Sorry.. will do..
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0s, 0q)