hi guys, hope someone can help me with this
my mk5 golf gti 2.0tfsi dsg med9.1 gives an throttle error after i wrote the ori file back and doesnt responce on the gaspedal. i tryed an tuned file with a other letter at the end.

ori 1k0907115A and tuned 1k0907115J.

i did a ori fullread and checksums were OK. then i fullwrote the tuned file and it gives some shocks at full load but it drives ok with part throttle so i did a throttle bassicsettings and an adaption but still the same issue.
so i fullwrote the ori back and now it wont responce and have a bad idle. i tryed the bassicsettings and adoptions but still no luck.
it has a dtc in the throttle and it says error when i try the basicsettings. its acting like i have put a wrong ecu in it but i only changed the files.

i use mppsv16 to read and write.

thnks!

Dont have bdm yet but car can drive with the 115J file but not propperly , tried some other ori files but react the same.

I know, it doesnt work , but wanted to be sure. File is mine but didnt have a damos for the 115a , i thought just give it a try but didnt go well

i splitted both files and paste the 115a in the 115j and it drives propperly now and can learn the throttle again