NefMoto > ECU Files > ECU Definition Files > Audi TT 1.8 20VT 8N0906018H xdf definition
Pages: [1]
« previous next »
Author Topic: Audi TT 1.8 20VT 8N0906018H xdf definition  (Read 13161 times)
dream
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 92
« on: December 08, 2017, 02:19:10 PM »
Heey guys,

I just want to share my defined TT H-box.
This xdf is defined with the following:
-Disable/delete EGT, EVAP, rear O2, SAI, N249, missfire and MAF.
-Activation of KFTVSA map for fueling in overrun condition (Schubabschaltung).
-CAN communication configuration (which I needed to modify because switching from an S3 narrowband 512kb to TT wideband 1024kb ecu).
-Launch control (soft limiter)
-2-step LC/Anti-lag/No lift shift (which you would need to look after the correct addressing if adding this option to your file)
-5120 hack maps
-Dashpot function
-Many standard fueling, ignition and boost maps.

I have tested many of these maps work for me.

Good luck Smiley

Edit:
Uploaded the files on my github: https://github.com/dreammatch/8N0906018H
« Last Edit: July 02, 2018, 02:37:59 AM by dream » Logged
carlhook
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23
« Reply #1 on: December 31, 2017, 03:19:54 PM »
You are the G man. I just got my 225 tt and am learning this remapping game.
Can you maybe explain what do you mean by the 2step address looking? only slow limit is available in stock form.
What should I put in the LC/AL/NLS code map? it is FF in all fields with 0 in both axis.

Thanks in advance man!
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630
« Reply #2 on: December 31, 2017, 05:12:56 PM »
You need to find the right addresses for the routine.
Then you need to find a location for the routine itself.
And then you need to find the routine call address, and compile the routine code.

If you are just beginning to learn remapping you might want to wait doing it yourself Smiley
The other option is to find somebody skilled that will implement it for you, possibly for payment.


Happy New Year Smiley
Logged
mightemouce
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 67
« Reply #3 on: January 21, 2018, 06:51:46 AM »
Quote from: dream on December 08, 2017, 02:19:10 PM

Original H-box: https://ufile.io/465uw
XDF: https://ufile.io/7ddhx


Any chance this file is / or can be hosted somewhere else ?

Link is no longer available 
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600
« Reply #4 on: January 22, 2018, 02:34:52 AM »
-CAN communication configuration (which I needed to modify because switching from an S3 narrowband to wideband).
-Dashpot function

Can someone please explain the dashpot? What is the german word to find it in the FR?
What was done to the CAN? Is this just CAN related dtcs?
Logged
FredJ
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #5 on: February 28, 2018, 10:54:32 PM »
Any chance of a new host such as mega.co.nz?
Logged
killerx
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #6 on: April 02, 2018, 01:00:36 PM »
the best XDF Smiley
Logged
DBoy88
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
« Reply #7 on: April 10, 2018, 06:54:48 AM »
Id really like these files if someone could please reupload
Logged
shifter
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
« Reply #8 on: June 28, 2018, 06:35:04 AM »

the file is unavailable Sad could it be re-uploaded or emailed Huh
Logged
dream
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 92
« Reply #9 on: July 02, 2018, 03:02:21 AM »
Sorry for my late response, I've been away for some time.

Quote from: carlhook on December 31, 2017, 03:19:54 PM
You are the G man. I just got my 225 tt and am learning this remapping game.
Can you maybe explain what do you mean by the 2step address looking? only slow limit is available in stock form.
What should I put in the LC/AL/NLS code map? it is FF in all fields with 0 in both axis.

Thanks in advance man!
The 2 step is not included in the stock bin, you will need to run the launch.exe or launch.php which you can find in this thread:
http://nefariousmotorsports.com/forum/index.php?topic=607.0

My own file (which is included with the 2-Step/NLS/AL is also in my github project.
Note: Don't use it without knowing whats changed because I have edited lots of things that might be not eligible with your setup.

Quote from: aef on January 22, 2018, 02:34:52 AM
Can someone please explain the dashpot? What is the german word to find it in the FR?
What was done to the CAN? Is this just CAN related dtcs?

Dashpot can be find in the FR as 'dashpot'. Its used for pickup speed at/near idle, its because I run mafless because I use BOV and the engine always stalls when clutch depressed. That's why I needed to alter the dashpot function. (I know some people will disagree with the use of BOV, so be it)
I got several CAN communication DTC's so I needed to adjust the communication configuration to fix these. I am running now without any DTC's.
« Last Edit: July 02, 2018, 03:20:37 AM by dream » Logged
parik
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 4
« Reply #10 on: December 22, 2020, 11:08:47 AM »
hi, which map sensor do you use? i am beating with CWPLGU = 0.

Quote from: dream on December 08, 2017, 02:19:10 PM
Heey guys,

I just want to share my defined TT H-box.
This xdf is defined with the following:
-Disable/delete EGT, EVAP, rear O2, SAI, N249, missfire and MAF.
-Activation of KFTVSA map for fueling in overrun condition (Schubabschaltung).
-CAN communication configuration (which I needed to modify because switching from an S3 narrowband 512kb to TT wideband 1024kb ecu).
-Launch control (soft limiter)
-2-step LC/Anti-lag/No lift shift (which you would need to look after the correct addressing if adding this option to your file)
-5120 hack maps
-Dashpot function
-Many standard fueling, ignition and boost maps.

I have tested many of these maps work for me.

Good luck Smiley

Edit:
Uploaded the files on my github: https://github.com/dreammatch/8N0906018H
Logged
dream
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 92
« Reply #11 on: February 24, 2021, 01:54:12 PM »
Quote from: parik on December 22, 2020, 11:08:47 AM
hi, which map sensor do you use? i am beating with CWPLGU = 0.

Bosch 0 281 002 576 did the job for me.
You will have to work your way trough with DSLGRAD en DSLOFS.
The parameters Bosch gives you on the internet did not match my calibration

The dashpot function was not the thing I needed back then, but I searched it out and its there for ppl who "need" it.

Quote from: aef on January 22, 2018, 02:34:52 AM
What was done to the CAN? Is this just CAN related dtcs?

Little late answer, but yes this was the case.
« Last Edit: February 24, 2021, 02:37:04 PM by dream » Logged
nupustas
Full Member
***

Karma: +3/-7
Online Online

Posts: 122
« Reply #12 on: May 17, 2021, 01:24:24 AM »
Perfect xdf. Thanks.
P.S. Works also with "J" bin. Not all maps and adresses checked, but a lot of i looked, matches 100proc
Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 402
« Reply #13 on: January 20, 2022, 10:33:45 AM »
Thank you for this work!

Will be using this xdf & stock calibration for my 1.8T 4 motion project.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 08:00:10 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)