NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > TFSI WITH FORGET WASTGATE
Pages: [1]
« previous next »
Author Topic: TFSI WITH FORGET WASTGATE  (Read 4755 times)
chiptuner123
Full Member
***

Karma: +0/-8
Offline Offline

Posts: 50
« on: December 29, 2017, 12:43:55 AM »
this car audi s3 is stage 1 but with forget wastgate,that make boost 1.5bar over and 1.1 stable.
The problem is that  at full throttle and 3500rpm make big overboost 1,6bar for 2 seconds and drops  down to 1bar,and then rise to 1,1 1,2bar at 5000rpm
Logged
chiptuner123
Full Member
***

Karma: +0/-8
Offline Offline

Posts: 50
« Reply #1 on: December 29, 2017, 01:31:38 AM »
ecu 8P0907115H
I make all other tuning exept The LDRXN x6,the KFLDIMX ,KFLDRL I am not touch it is original without mods.Because of strong forget WG spring the problem is the non linear boost pressure,
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1455


mk4 1.8T AUM
« Reply #2 on: December 29, 2017, 03:20:35 AM »
R u retarded?
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #3 on: December 29, 2017, 03:34:12 AM »
Quote from: chiptuner123 on December 29, 2017, 01:31:38 AM
ecu 8P0907115H
I make all other tuning exept The LDRXN x6,the KFLDIMX ,KFLDRL I am not touch it is original without mods.Because of strong forget WG spring the problem is the non linear boost pressure,

You make all other tuning apart from the load and pressure regulation maps? wtf
Logged
chiptuner123
Full Member
***

Karma: +0/-8
Offline Offline

Posts: 50
« Reply #4 on: December 29, 2017, 03:44:27 AM »
YES all other maps ok
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #5 on: December 29, 2017, 03:48:21 AM »
Quote from: chiptuner123 on December 29, 2017, 03:44:27 AM
YES all other maps ok

Post your file, for the bants
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #6 on: December 29, 2017, 09:39:57 AM »
Serious contender for best thread of 2018.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
« Reply #7 on: December 30, 2017, 06:04:22 AM »
What are you using for chart ?
Logged
chiptuner123
Full Member
***

Karma: +0/-8
Offline Offline

Posts: 50
« Reply #8 on: December 30, 2017, 06:12:55 AM »
I solve it thanks to all.  good 2018 to all of you Smiley..................
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 08:53:20 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)