Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Disable STFT for idle area only?
Pages: [
1
]
« previous
next »
Author
Topic: Disable STFT for idle area only? (Read 5457 times)
contrast
Full Member
Karma: +20/-3
Offline
Posts: 215
Disable STFT for idle area only?
« on: December 29, 2017, 06:52:59 AM »
Hi
I have tried to search using forum search (which sucks btw) and also through google. Been through FR and cant seem to make it happen.
I have defined NRKAB. Not sure it is correct one to change, but increasing it from 400 rpm to 1000 did nothing.
If anyone has an idea how to disable STFT for idle or set a lower rpm limit via some value then I very much appreciate it.
I can obviously disable LTFT upper/lower ranges as well as idle area.
Thank you
Logged
vwaudiguy
Hero Member
Karma: +53/-37
Offline
Posts: 2024
Re: Disable STFT for idle area only?
« Reply #1 on: December 29, 2017, 09:38:24 AM »
Quote from: contrast on December 29, 2017, 06:52:59 AM
I can obviously disable LTFT upper/lower ranges as well as idle area.
Thank you
What are you trying to accomplish? Wouldn't disabling LTFT @ idle do the same thing? There is a map to do this by load, I'll take a look.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
contrast
Full Member
Karma: +20/-3
Offline
Posts: 215
Re: Disable STFT for idle area only?
« Reply #2 on: December 29, 2017, 09:53:17 AM »
The reason is irrelevant at this point. LTFT and STFT are very different and disabling the former will not yield the result I’m after.
Logged
vwaudiguy
Hero Member
Karma: +53/-37
Offline
Posts: 2024
Re: Disable STFT for idle area only?
« Reply #3 on: December 29, 2017, 09:56:07 AM »
So you're just not willing to say.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
contrast
Full Member
Karma: +20/-3
Offline
Posts: 215
Re: Disable STFT for idle area only?
« Reply #4 on: December 29, 2017, 10:18:28 AM »
Im working on very large injectors that are not predictable at low pw and idle and afr bounce at idle. STFT causes too wide swings.
With load (steering lock for example) its perfect.
Logged
corradovolksb
Full Member
Karma: +18/-1
Offline
Posts: 112
Re: Disable STFT for idle area only?
« Reply #5 on: December 29, 2017, 11:08:53 AM »
Have you tried raising the idle to 850 or 900rpm? That might help smooth out the idle pulse width. Or you can pull fuel at idle using fkkvs until your afr is stable. Another thing you could try is adjusting the idle torque reserve by raising the values and see if that helps smooth it out. How big are the injectors?
Sent from my iPhone using Tapatalk
Logged
2000 Nogaro blue S4 Stage 2. VAG for life.
contrast
Full Member
Karma: +20/-3
Offline
Posts: 215
Re: Disable STFT for idle area only?
« Reply #6 on: December 29, 2017, 11:10:29 AM »
Idle raised - no help
It runs smooth as butter at 13AFR for example. But stoich is bouncy.
I did try KFMRES and all, but maybe not enough.
They are 2000cc
Logged
Lost
Hero Member
Karma: +21/-14
Offline
Posts: 556
Re: Disable STFT for idle area only?
« Reply #7 on: December 29, 2017, 12:49:17 PM »
Tried basic settings in VCDS ch 99?
While activ, this will turn off all the corrections. Monitor your wb02.
GL.
Logged
contrast
Full Member
Karma: +20/-3
Offline
Posts: 215
Re: Disable STFT for idle area only?
« Reply #8 on: December 29, 2017, 01:55:22 PM »
This is a Volvo btw. I’m sorry I did not specify.
Anyone know of any map, value? I can change code too if needed. I do need a kick in the right direction.
Logged
thedrill
Full Member
Karma: +12/-3
Offline
Posts: 139
Re: Disable STFT for idle area only?
« Reply #9 on: December 29, 2017, 07:12:09 PM »
Would altering Temin help with smoothing things out?
Logged
contrast
Full Member
Karma: +20/-3
Offline
Posts: 215
Re: Disable STFT for idle area only?
« Reply #10 on: December 30, 2017, 02:21:01 AM »
Thanks to a fellow forum member. Disabling can be done via RLLRUN.
Case closed.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 30, 2024, 12:46:59 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
