immo2 ecu in immo3 car.

Pages: [1]

Author

Topic: immo2 ecu in immo3 car. (Read 5751 times)

marcello7x

Full Member

Karma: +1/-0
Offline

Offline

Posts: 126

	immo2 ecu in immo3 car. « on: January 06, 2012, 11:00:24 PM »

What needs to be done? Is the eeprom dump on an immo2 similar to the 3? Can I use the same immo 3 disable method on this.


	Logged

thom337

Full Member

Karma: +15/-1
Offline

Offline

Posts: 81

	Re: immo2 ecu in immo3 car. « Reply #1 on: January 07, 2012, 04:59:26 PM »

you can use the same method.... or if I recall, you can perform and adaptation using VAG-COM that doesn't require an SKC. The SKC's are for IMMO 3.


	Logged

marcello7x

Full Member

Karma: +1/-0
Offline

Offline

Posts: 126

	Re: immo2 ecu in immo3 car. « Reply #2 on: January 08, 2012, 05:26:52 PM »

I know you can in a fully immo2 car, not sure about the mix and match.


	Logged

Gonzo

Sr. Member

Karma: +20/-30
Offline

Offline

Posts: 483

	Re: immo2 ecu in immo3 car. « Reply #3 on: January 08, 2012, 06:50:08 PM »

You just need to adapt cluster to ECU and it will work.


	Logged

Pages: [1]

Jump to:

Welcome, Guest. Please login or register.
Did you miss your activation email?