Pages: [1]
Author Topic: Audi TT 2.8 24v turbo,VVT map needed....  (Read 2561 times)
rossi46numberone
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: January 13, 2018, 11:14:53 PM »

Hi everybody,
 I have an AUDI TT MK1 with a 2.8 turbo 24v swap(BDE engine code), C2 stage 3 software and I'm planning to go standalone with a "BLACK ecu" from "ECU-master".
 I have already done that in the past but my big concern about this project is the VVT cams map.
 Does anybody can help me?
 I'm searching about a 3D map like Winols or tuning / setting advice etc....
 I don't want to run engine without the VVT benefit.
 Thanks you all.....

 Michele.
Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #1 on: March 24, 2020, 08:48:20 PM »

Do you still happen to need vvt maps? Recently been going through my BDF and I have these maps.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)