Me7 logger crashs when I try to take a log....

Pages: [1]

« previous next »

Author

Topic: Me7 logger crashs when I try to take a log.... (Read 6731 times)

Manford

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 41

	Me7 logger crashs when I try to take a log.... « on: February 07, 2018, 01:11:07 PM »

i have a .cfg file to take logs but when I try and take them it crashs and comes up with the attached errors, if i drop the number of parameters being logged it appears to work ok, although looking at my logs in ecuxplot they look like jibberish at the moment, but im not convinced they are being logged properly in the first place.

Any thoughts?


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: Me7 logger crashs when I try to take a log.... « Reply #1 on: February 07, 2018, 01:17:48 PM »

Dont use the front end, make sure the command line works first.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

jimmcgee5

Full Member

Karma: +7/-7
Offline

Offline

Posts: 201

	Re: Me7 logger crashs when I try to take a log.... « Reply #2 on: February 07, 2018, 01:26:58 PM »

the config file you are using is set for , ECUCharacteristics = 8E0909518AK 0003 torque modv4 test.ecu , you need to create your own config , from your ecu file .


	Logged

jimmcgee5

Full Member

Karma: +7/-7
Offline

Offline

Posts: 201

	Re: Me7 logger crashs when I try to take a log.... « Reply #3 on: February 07, 2018, 01:32:37 PM »

and this should give you the correct parameters to log , just remember to create your ecu file .


	Logged

Manford

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 41

	Re: Me7 logger crashs when I try to take a log.... « Reply #4 on: February 07, 2018, 02:00:58 PM »

Quote from: jimmcgee5 on February 07, 2018, 01:32:37 PM

and this should give you the correct parameters to log , just remember to create your ecu file .

I did create my own ecu, il ha w to double check what’s going on, hopefully sorting the ecu issue will fix both my current issues

Sent from my iPhone using Tapatalk


	Logged

Manford

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 41

	Re: Me7 logger crashs when I try to take a log.... « Reply #5 on: February 08, 2018, 03:03:19 AM »

With both configs the logger says its using my ecu file as the reference?


	Logged

jimmcgee5

Full Member

Karma: +7/-7
Offline

Offline

Posts: 201

	Re: Me7 logger crashs when I try to take a log.... « Reply #6 on: February 08, 2018, 03:56:46 AM »

are you making these live , so they show on the screen as you log , I don't have any live logging , well maybe afr and rpm , but I can log everything in that cfg to a log file .

jim


	Logged

jimmcgee5

Full Member

Karma: +7/-7
Offline

Offline

Posts: 201

	Re: Me7 logger crashs when I try to take a log.... « Reply #7 on: February 08, 2018, 04:03:13 AM »

just noticed you are , turn off all the variables apart from 1 or 2 , you should be keeping your eyes on the road Tongue


	Logged

Manford

Jr. Member

Karma: +2/-0
Offline

Offline

Posts: 41

	Re: Me7 logger crashs when I try to take a log.... « Reply #8 on: February 08, 2018, 04:08:19 AM »

So only log, Lamsoni_w, lamsbg_w, rpm and wped_w on a single pull?

Then drop Lamsoni_w, LAmsbg_w and replace with Pus_w and pvdks_w on another run?

I dont want so see anything when driving, just push a button, log the info, two or three runs and review once I get home.....


« Last Edit: February 08, 2018, 04:12:28 AM by Manford »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 11:52:06 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search