Battle to settel Lambda on MK 5 GTi

Pages: [1]

« previous next »

Author

Topic: Battle to settel Lambda on MK 5 GTi (Read 4198 times)

vanrhj

Full Member

Karma: +0/-5
Offline

Offline

Posts: 55

	Battle to settel Lambda on MK 5 GTi « on: February 12, 2018, 12:47:42 AM »

Hi All
Can anyone please assist me and check my File and log.
I am battling to settle my Lambda on my tune.
Witch maps must I have I look at to sort this out? Embarrassed


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Online

Online

Posts: 12270

	Re: Battle to settel Lambda on MK 5 GTi « Reply #1 on: February 12, 2018, 01:47:02 PM »

Please post the original CSV.

Hint: if ECUxPlot can't parse it, you broke it.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

NBR

Full Member

Karma: +20/-7
Offline

Offline

Posts: 79

	Re: Battle to settel Lambda on MK 5 GTi « Reply #2 on: February 12, 2018, 03:20:20 PM »

Post your ori and tune if you want. Might also help if someone can look at your file and see if anything looks out of order


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Online

Online

Posts: 12270

	Re: Battle to settel Lambda on MK 5 GTi « Reply #3 on: February 12, 2018, 04:15:49 PM »

Quote from: NBR on February 12, 2018, 03:20:20 PM

Post your ori and tune if you want. Might also help if someone can look at your file and see if anything looks out of order

I would much prefer a proper log.


	Logged

vanrhj

Full Member

Karma: +0/-5
Offline

Offline

Posts: 55

	Re: Battle to settel Lambda on MK 5 GTi « Reply #4 on: February 12, 2018, 10:06:48 PM »

Thanks to all that will assist.
Will do a proper log and post it. Wink


	Logged

gman86

Hero Member

Karma: +45/-128
Offline

Offline

Posts: 705

	Re: Battle to settel Lambda on MK 5 GTi « Reply #5 on: February 13, 2018, 12:45:05 AM »

From the log, there's a few cases where you're requesting load, it's going nowhere? I see a few requests of 191.7 (diagnostic limit) but the actual load isn't even >100. Also actual boost never seems to go above atmospheric. As your actual load never actually gets anywhere, you'll not be entering into any of the higher load areas of the various maps. Is the turbo working??


	Logged

vanrhj

Full Member

Karma: +0/-5
Offline

Offline

Posts: 55

	Re: Battle to settel Lambda on MK 5 GTi « Reply #6 on: February 13, 2018, 02:24:36 AM »

yes it is a brand new unit. I did not do I full WOT because of the file be only a base map.
I picked up that my DV valve is leaking. Will order new part and replace the faulty unit.
Will do a log and pate again.


	Logged

vanrhj

Full Member

Karma: +0/-5
Offline

Offline

Posts: 55

	Re: Battle to settel Lambda on MK 5 GTi « Reply #7 on: May 20, 2022, 03:49:58 AM »

Hi. Some info on issue. New DV installed and still the same issue. I then remote the compete unit and picked up that the DV does not seat properly in the housing.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 02:12:17 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search