Pages: [1]
Author Topic: Bricked C-Box (ABT 310PS) just by going into bootmode?  (Read 3637 times)
f-schlauch
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 28


« on: February 19, 2018, 05:24:34 AM »

I can't connect anymore, not even with VAG COM. couldn't read anything (flash or eeprom) over OBD thats why I tried bootmode, I was about to clone the immobilizer.

did I mess up by grounding PIN24 on the ABT soldered flash.. copy protection?


PS: great community, been reading here since a couple of weeks
« Last Edit: February 19, 2018, 05:42:39 AM by f-schlauch » Logged

flash a few, brick a few
prj
Hero Member
*****

Karma: +1072/-480
Online Online

Posts: 6035


« Reply #1 on: February 19, 2018, 05:44:20 AM »

Yeah you should not ground the flash there, you should have grounded it by R289.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
f-schlauch
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 28


« Reply #2 on: February 19, 2018, 08:59:54 AM »

Yeah you should not ground the flash there, you should have grounded it by R289.

is that a resistor and where is it?

do you think I fried something from the ECU or just the flash?
Logged

flash a few, brick a few
danzzon
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 27


« Reply #3 on: December 17, 2019, 07:15:32 AM »

Did u find out where to ground it to get it into boot mode ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)