pvl - yes , i flash cg box on bench with cg file via mpps and work like a charm !

but as i said , i have spare 018R box , which i would like to test - write CG file on 018R box ,
i still don't understand why we have to copy cg eeprom immo to 018r box ?
in me7.5 we could crossflash without cloning immo , test many times,  is me3.83 different ?

if i understand good - im me3.8x the flash  (018cg or 018R) version is matched to immo eeprom ? and thats why we need also to copy immo dump when changing flash from 018cg to 018cj/018r etc. ?

so vcds ecu swapping procedure after crossflashing without immo cloning won't help me ? only immo and flash copy when crossflashing files in me3.8x?

i will try in the meantime and post results

also i don't understand why immo off me 3.83 ? it has simple immo2 , so after swap only vagcom/vcds 10 adaptation 00 read save and you have immo matched to the new(used) ecu http://www.ross-tech.com/vag-com/cars/immobilizer2.html

i was thinking about stock AGU engines in stock cars , like a3 / golf iv with immo and clusters / keys

in golf 1-2 i also wouldn't like to see golf iv/a3 tacho   eot

I will test and give back results

Sorry for bumping this, can someone tell in what KFLF in M38 and M59 results? AFR?
In original-map it goes from 0,9 to 1,3 (when im right with the factors), which wouldn´t really makes sense that it goes lean in higher loads? I took the fact 0,007813, maybe I missed something?

Is it more correction for injection time? If´ve seen few maps where it was set higher in high loads..


Would be nice if someone could guide me in the right direction, before doing trying and error...