Pages: [1]
Author Topic: 2.0TFSI 1K0907115B S0010 eeprom issus  (Read 3915 times)
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« on: March 20, 2018, 04:57:44 PM »

I have a eeprom that matched the flash file of 1K0907115B sw0010 I used eeprom v2.1.1 to immo off the eeprom file and use bdm to flash both eeprom and. Bin to the ecu and then try to start the car and it says it immo actived. Top window is the eeprom file I am immo offing and the bottom window is the flash part from what I know it's the ori  saved as .bin and not .ori
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #1 on: March 20, 2018, 05:12:57 PM »

Here the files
Logged
hitmaaan
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 1


« Reply #2 on: March 21, 2018, 12:19:38 AM »

Hi, i have modify your eeprom... test it
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #3 on: March 21, 2018, 01:44:34 AM »

Thank you I'll try tonight once I'm off work, you think it should work with the flash file now
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #4 on: March 21, 2018, 02:18:43 PM »

I have not had any luck with this file or immo the eeprom for some reason
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #5 on: March 31, 2018, 05:55:04 AM »

jpab08 thank you your files works with out an issue, now I can have two of then both running 7115B sw0040
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.269 seconds with 17 queries. (Pretty URLs adds 0.018s, 0q)