Pages: [1]
Author Topic: Hello, Audi A6 C5 04 Dump crypted ?  (Read 4865 times)
Nasenbastl
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« on: March 26, 2018, 04:01:34 AM »

Hello, I wanted to read my new speedometer today. The dump is the same in each line.
Can it be that the dump is crypted?
With which program can I read it the best.
I have
Cancommander 2.5
VAGeprammer 1.19

The dump is from year 2005 (exchange part)

Thank you for advice

Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #1 on: March 27, 2018, 12:16:05 AM »

Upload the dump you have read. I guess the cluster doesnt work and fis blinks?
Logged
Nasenbastl
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #2 on: March 27, 2018, 04:00:42 AM »

Hello, the speedometer works. He should only in another car with a newer year.I have to transfer a couple of characteristics and the immobilizer, it's a diesel speedometer. if everything goes I will change the speedometer discs. The cable assignment is absolutely the same.
If I select, I get the same message in each line. Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll Eyes Roll Eyes
I'll upload the dump tonight ....
« Last Edit: March 27, 2018, 04:03:34 AM by Nasenbastl » Logged
Nasenbastl
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #3 on: March 27, 2018, 06:59:03 AM »


Problem solved

It works !!!!!! Grin Grin Grin Grin
It was a mistake on the dongle. Embarrassed Embarrassed Embarrassed Embarrassed

I am happy without end, so much thought and calculated .... Simply cool  Cool Cool Cool Cool Cool Cool Cool
Logged
nkiller
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #4 on: March 30, 2018, 02:00:33 AM »

Can you upload the dump?  Grin
Logged
Nasenbastl
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #5 on: April 02, 2018, 10:27:22 PM »

Yes  Grin
Logged
Nasenbastl
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #6 on: April 30, 2018, 01:29:15 AM »


Hello, does anyone have a picture of the installation location of the Eprom? I would like to solder one out to try something
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #7 on: April 30, 2018, 01:37:46 AM »

On te backside close to the cpu
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)