Get the EGT's fixed and calibrated.
Initial fueling is done by LAMFA and then when you hit the threshold, BTS or whatever is richer. This is a narrowband car so there is no guarantee you will hit those requests as your fuel and MAF calcs and readings are unlikely to be 100%.
I thought LAMFA was disabled by default though? I did set mine up for the last two columns to be 12.5 AFR though. Axis is also set up. Ok so I set my EGT model back to stock , my whole fueling is set to stock except for LAMFA and AXIS being enabled. So , how should this act now? Is is going to follow BTS all the time now since it’s the richer of the two between BTS vs lamfa??
