Installing K03s into AGU with ME3.8 Australia

Pages: [1]

« previous next »

Author

Topic: Installing K03s into AGU with ME3.8 Australia (Read 3672 times)

Snel

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Installing K03s into AGU with ME3.8 Australia « on: May 14, 2018, 04:56:20 AM »

Hi All

First post and really keen to get into tuning my car.

I have just bought a K03s turbo for my 2001 1.8T AGU engine Mk4 GTI and I was wanting to get it tuned.
The car currently has a 3 inch turbo back exhaust, upgraded TIP and pod filter. Apart from suspension the rest of the car is stock.
Problem I have is that I can't find anyone close in Brisbane Australia to tune it for me.

How would I go about port flashing it or is that not possible with ME3.8

Cheers, Gary


	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: Installing K03s into AGU with ME3.8 Australia « Reply #1 on: May 14, 2018, 05:17:17 AM »

2001 AGU? Aus special? UK ones stopped in 2000.

It's also M3.8. E is for electronic. Some 3.8s can be flashed over the port. R revisions IIRC.


	Logged

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2800

	Re: Installing K03s into AGU with ME3.8 Australia « Reply #2 on: May 14, 2018, 06:00:36 AM »

M3.83 can be flashed over port. The earlier ones can not


	Logged

Giving your mom a tuneup

Snel

Newbie

Karma: +0/-0
Offline

Offline

Posts: 2

	Re: Installing K03s into AGU with ME3.8 Australia « Reply #3 on: May 14, 2018, 02:40:44 PM »

Thanks for the responses guys, where would I find flash files for an AGU engine with m3.83.


	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: Installing K03s into AGU with ME3.8 Australia « Reply #4 on: May 14, 2018, 11:29:46 PM »

You make them?


	Logged

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2800

	Re: Installing K03s into AGU with ME3.8 Australia « Reply #5 on: May 15, 2018, 05:20:43 AM »

Quote from: Snel on May 14, 2018, 02:40:44 PM

Thanks for the responses guys, where would I find flash files for an AGU engine with m3.83.

If you're looking for premade files for you to download and flash you're shooting yourself in the foot right off other rip. No one is going to give you any calibrations... well for free abyway. If you're looking for a stock file to start with that's a totally different story and you can find damos and stock files under the approate forum sections. I've personally uploaded dome map packs that may help you out if you look for them


	Logged

Giving your mom a tuneup

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 02:36:36 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search