Pages: [1]
Author Topic: gearbox swap, cruise control problem me3.8.3  (Read 3505 times)
Adrianb
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« on: June 07, 2018, 03:46:42 PM »

Hi,
I have problem after gearbox swap (from tdi) on AGU engine..
cruise control works on 1-4 gear well, but on 5th gear not work. Gearbox from tdi have longer 4 and 5 gears

can anyone help me to find what map I need modify? I have damos for me5.92 (very similar to 3.83) but i canĀ“t find this map.

thank you for any help
Logged
dunt
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #1 on: June 10, 2018, 03:15:48 AM »

I know this problem but from another ECU. In my case the swapped gearbox hade not the same transmission ratio so I have to adjust the transmission ratio in the engine control unit.
Logged
Adrianb
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« Reply #2 on: June 10, 2018, 10:08:55 PM »

I´ve found these three maps for gear detection (speed/rpm)
can anyone help me with modifying these constants? I don´t know if lowering or increasing values and where...  Undecided


« Last Edit: June 10, 2018, 10:12:39 PM by Adrianb » Logged
Adrianb
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« Reply #3 on: June 11, 2018, 10:40:49 AM »

Solved
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #4 on: June 11, 2018, 01:21:58 PM »

Is it a secret aye?
Logged
Adrianb
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« Reply #5 on: June 11, 2018, 01:37:41 PM »

Kfgang.2 map content copy to kfgang.0 and kfgang.1 maps + little mods for 5th gear in lower rpm.
So values for longer gearbox needs to be increased. Now cruise control working on all gears. Maybe not 100% clear solution, but working for me.

Very nice to see your fast repply after problem was solved Wink I haven't problem share this solution.
« Last Edit: June 11, 2018, 01:39:44 PM by Adrianb » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)