Pages: [1]
Author Topic: Cooling fan setpoint adjustment?  (Read 2368 times)
wolfe2118
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« on: June 12, 2018, 06:52:28 AM »

I'm very new to this so please forgive me if it's been covered already as I'm trying to take in as mush information as possible and my little brain hurts from it.

I'm building a B6 Audi using a AWN (Motronic 7.1.1) engine from a 01 A6.  In the past I have used an external switch and relay system to control fans but with this build I would like to integrate the 3.0 fan control module to turn on fans but use the ECU to control the on/off temp.  I would like to know that in the future I can adjust the temp if needed, is this possible?

Thanks
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #1 on: June 12, 2018, 12:28:09 PM »

If the stock ECU has fan control of course it is possible.
I don't remember the name off the top of my head, but it is very much doable, and you can change all sort of parameters for when the fan comes in and how hard.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)