Pages: [1]
Author Topic: Adding anti-lag launch control and no-lift shift Question  (Read 2884 times)
dreconx
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« on: June 21, 2018, 09:43:52 AM »

Hi,

I have a Question about this topic in the Nefmoto wiki.
now i have a me7.5 audi s3 8l BAM engine, now the topics says that you need to redirect the code to the new code you put in the free spot.
the problem is, those 2 adresses they give you wont match in my ecu, i get diffrent numbers and where the free space should be is already taken by other code.
Is there a way to transfer the adresses? so you know what adress i need to use in my ecu?

thanks

kind regards

ps: My English is not that good but i do my best Smiley
Logged
woj
Hero Member
*****

Karma: +41/-3
Offline Offline

Posts: 500


« Reply #1 on: June 21, 2018, 10:29:22 AM »

Well, at least you didn't use a script, blindly flashed the file, bricked the ECU, and then cried for help here, so that's a first good step.

A second good one would be posting your bin file Wink Then somebody might be able to help you (not me, because I don't do VAGs).
Logged
dreconx
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« Reply #2 on: June 21, 2018, 10:38:58 AM »

Hi,

I have a Question about this topic in the Nefmoto wiki.
now i have a me7.5 audi s3 8l BAM engine, now the topics says that you need to redirect the code to the new code you put in the free spot.
the problem is, those 2 adresses they give you wont match in my ecu, i get diffrent numbers and where the free space should be is already taken by other code.
Is there a way to transfer the adresses? so you know what adress i need to use in my ecu?
This is a original bin for the s3

thanks

kind regards

ps: My English is not that good but i do my best Smiley
Logged
dreconx
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 17


« Reply #3 on: June 21, 2018, 10:39:31 AM »

Well, at least you didn't use a script, blindly flashed the file, bricked the ECU, and then cried for help here, so that's a first good step.

A second good one would be posting your bin file Wink Then somebody might be able to help you (not me, because I don't do VAGs).
thanks for the reply i posted the bin and wait for a vag tuner Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)