hi i got AEB after WB conversion i got a bad timing
https://imgur.com/a/jatlm4zi got a bigger turbo and bigger injectors i got stock file with changes like in this post
http://nefariousmotorsports.com/forum/index.php?topic=12391.msg115855#msg115855 and i changes KRKTE and TVUB all other is stock i have AEB block with stock tensiones no VVTI, i check belt and chain and its ok. My question is what parametrs in me7logger i should log to check what is going on? I got this dtc and i make some log
17931 - Crash Signal from Airbag Controller: Implausible Signal
P1523 - 35-00 - -
18014 - Rough Road/Engine Torque Signal from ABS: Electrical Malfunction
P1606 - 35-00 - -
18062 - Please check DTC Memory of Instrument Cluster
P1654 - 35-00 - -
18058 - Powertrain Data Bus: Missing Message from Instrument Cluster
P1650 - 35-00 - -
17070 - ECM Power Relay Control Circuit (J271): Short to GND
P0686 - 35-00 - -
16396 - Bank 1: Camshaft A (Intake): Advance Setpoint not Reached (Over-Retarded)
P0012 - 35-00 - -
