NefMoto > Technical > Flashing and Chipping > Golf IV 1.8T AUQ wont start after remap...
Pages: 1 2 [3]
« previous next »
Author Topic: Golf IV 1.8T AUQ wont start after remap...  (Read 19850 times)
Leon1.8T
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #30 on: July 25, 2018, 08:54:49 AM »
I have not uploaded any logs.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #31 on: July 25, 2018, 09:05:24 AM »
Wrong thread sorry
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6038
« Reply #32 on: July 25, 2018, 01:57:00 PM »
Quote from: Leon1.8T on July 25, 2018, 07:16:09 AM
He warned me that this could happen, it was my decision so I cannot blame him.
Yeah except what was said is not true, it's nothing to do with the hard cut.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #33 on: July 25, 2018, 02:34:23 PM »
This hapends when checksum is no calculated.... put a car back to tuner... its need desolder flash from ecu and put back original file, or file with computed checksum with programmer ofcourse ...  Roll Eyes

I think this tuner is newbie  Wink BR
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #34 on: July 25, 2018, 02:46:45 PM »
Read the thread. He has apparently.
Logged
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14
« Reply #35 on: July 25, 2018, 03:40:19 PM »
if you have files, flash and eeprom put it here i correct checksum and immo off for you
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6038
« Reply #36 on: July 26, 2018, 01:16:34 AM »
Judging by the faults, most likely it had death code in EEPROM, and then 2nd time when pulling shit something was damaged.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Leon1.8T
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #37 on: August 03, 2018, 01:47:18 AM »
Hello all! I have left the ECU to a guy who deals with car amplifiers and all kind of electronics. Today he called me and said that the SMD's responsible for the signal to coils and injectors are fried and that I'will need to buy another ECU, because those elements are hard to find.
Logged
Leon1.8T
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #38 on: August 03, 2018, 03:04:10 AM »
My ECU part number is 06A 906 032 MJ, however I cannot  find a ECU with this number. Which ECU's are compatible with my engine?
Logged
Leon1.8T
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17
« Reply #39 on: August 09, 2018, 02:10:25 AM »
Finally, I have found ECU with the exact part number and my car started!!!   Cool Cool Cool.... Now all I have to do is to adapt the ECU to my car. Today I talked to my tuner and he said that he will send me the remap file, so I can upload it here. Thank you very much all! I will come back with the file.
Logged
Pages: 1 2 [3]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 12:09:11 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)