Pages: [1]
Author Topic: VW Golf iV search for the unknown.  (Read 3580 times)
wesselh93
Newbie
*

Karma: +2/-1
Offline Offline

Posts: 23


« on: August 20, 2018, 09:35:12 AM »

Hi guys,

Currently I'm busy with an ECU from a VW Golf mk4, since the car is over 15 years old now people in my area are starting to use this car for dirt track racing (no demolition).
I have had some IMMO off request simple soldering and read/write operation.
But correcting or improving the actual maps of this cars is something different.
Since programming over OBD still isn't possible in this ecu's you have to desolder the flash (AM29F200AB or BB)

Since there is not really al lot on this ECU's online I've had a lot to search for and test.
I even found a post on this very forum of how to decode and WHY is has to be decoded.
Decoding has to do with the lanes to the Processor.

My question is: Can anybody assist me in finding NMAX for this ECU.
I DO NOT REQUEST A HAND OUT SOLUTION, I would like to learn where and how to search for it.

Attached the decoded original read.
Car: Golf mk4
Engine 1.6l 8v
Code: AKL
ECU: 06A 906019AK
5WP4 417 04
Logged
wesselh93
Newbie
*

Karma: +2/-1
Offline Offline

Posts: 23


« Reply #1 on: August 21, 2018, 12:47:43 PM »

Hi guys,

A little update from my side, I think I found the correct address. I only think it's a little on the low side.
I don't have the actual RPM limit so I cant check.

But the following showed up:

Address 08400 should result in hex: C0 --> dec: 192 (factor 30 + eeprom = 5760 RPM

Could someone confirm I'm on the right track?
Logged
up50lut3
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 55


« Reply #2 on: August 28, 2018, 11:25:06 AM »

look in the community projects area. the ecu you have has already been extensively defined and  has a stage 1 and 2 file and full definitions( including nmax obv) and many many more.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12255


WWW
« Reply #3 on: August 29, 2018, 12:54:52 PM »

Moved to noob area.

Please put the ecu pn in the topic, and next time post in the def request area

btw to the above poster, 06A906019AK is different from 8E0909518AK
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)