Pages: [1]
Author Topic: Passat V6 - ME7.5 - 3B0 907 551 CJ / 0 261 207 466  (Read 5344 times)
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« on: September 02, 2018, 06:48:26 PM »

Hi everyone!

I need a help here!

Is the second time that my ECU was block.

After i write a new file to ECU, the engine not starts, and i can't write a new file with MPPS.

It occours in the past, in many times i just have to wait 10 minutes to write again, but now, i wait 30 minuts and not works!

What i have to make to solves it?


Thanks!
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #1 on: September 03, 2018, 09:25:16 PM »

that sounds like a brick not a block, look up brick here
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #2 on: September 03, 2018, 10:08:42 PM »

Post the file that bricked the ecu.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #3 on: September 05, 2018, 02:42:39 PM »

Post the file that bricked the ecu.

Its a file that not was fix in Me7sun.exe!

I always write the "out.bin" file, but in the last time i select a file unfixed! Much hurry make this error!

When this occours, i disconnect the barety per 10 minutes and all back works again, but its the second time thats the ECU dont give access to wirte a new file after this error!
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #4 on: September 05, 2018, 02:43:47 PM »

that sounds like a brick not a block, look up brick here

Occours after a unfixed checksun file
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #5 on: September 05, 2018, 02:44:37 PM »

Post the file that bricked the ecu.

was a unfixed checksum file!
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #6 on: September 05, 2018, 09:20:30 PM »

Sooo get a mpps cable and bootmode that bad boy, i only say mpps because galetto is same price these days and mpps clones are pretty good at
this point.
Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #7 on: September 11, 2018, 08:23:29 PM »

Sorry for delay!

I use MPPS, i try with boot mode MPPS and Galleto and not works!

When i try to wirte or read with MPPS say "ECU Not FOund"!

Its occours because i write a wrong file! I need to found a way to erase this wrong file and write the correct file!
Logged
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447


« Reply #8 on: September 11, 2018, 09:57:12 PM »

Do You have a copy of your eeprom? I have had a ecu I had to write the eeprom with bootmode new before i could bootmode the eprom,

Also if you want you can just ship me the ecu and ill fix it, i may have a spare in my bin
« Last Edit: September 11, 2018, 09:59:22 PM by Carsinc » Logged
Gulfstream
Full Member
***

Karma: +3/-5
Offline Offline

Posts: 232



« Reply #9 on: September 12, 2018, 01:37:21 PM »

Do You have a copy of your eeprom? I have had a ecu I had to write the eeprom with bootmode new before i could bootmode the eprom,

Also if you want you can just ship me the ecu and ill fix it, i may have a spare in my bin

I will try one more time with bootmode and galleto.

I will post the results soom!

Thanks!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)