Pages: [1]
Author Topic: p0605 on stock ecu/file/car  (Read 2885 times)
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« on: October 01, 2018, 01:36:20 PM »

i have a 2000 jetta 2.0     06A 906 018 JJ ecu p/n
has a p0605 and the car is bone stock with nothing done to it
i am not familiar with the 2.0 ecu. is this me7.x or a me5 ecu.
if a me5, can i use my bench harness for me7 to flash or just straight flash over obd with another stock 2.0 file? i can't find an original 018 jj file around. so if i can flash over obd, should i pull the file on it now and correct checksum or use ecu fix? i am not sure
thanks
« Last Edit: October 01, 2018, 01:51:57 PM by dirtnasty » Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #1 on: October 01, 2018, 03:20:17 PM »

M5.92* no nothing about me7 will work for m5.92. Replace the ecu
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #2 on: October 01, 2018, 07:09:40 PM »

M5.92* no nothing about me7 will work for m5.92. Replace the ecu

thanks for the info man appreciate it.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)