IMMO adapt problem MED 9.1 (login not accepted)

Pages: [1]

« previous next »

Author

Topic: IMMO adapt problem MED 9.1 (login not accepted) (Read 4047 times)

Bitshifter

Full Member

Karma: +10/-7
Offline

Offline

Posts: 94

	IMMO adapt problem MED 9.1 (login not accepted) « on: October 14, 2018, 02:51:54 AM »

I want to prepare a spare ECU and i idn’t really want to open up my original ECU, so it isn`t possible to make a clone.

I read e² and flash by BDM from ebay ECU an try ECU swap (http://wiki.ross-tech.com/wiki/index.php/Immobilizer_IV_ECU_Swapping).

If i try to login (12665), VCDS shows an error: ECU send no seed. It drives me crazy. What is the problem?

Set IMMO off: car starts all fine.


	Logged

cherry

Sr. Member

Karma: +26/-2
Offline

Offline

Posts: 260

	Re: IMMO adapt problem MED 9.1 (login not accepted) « Reply #1 on: October 14, 2018, 05:46:16 AM »

1) Adaption via VCDS is possible until MY2006 (VW) only
2) Immodata are crypto, so just forget that login

Open your ecu and make full BDM read or read immodata from cluster/ecu OBD with special tools and write them to new ecu. But remember immodata is crypted, so first you need to encrypt eeprom to unique data from flash. So BDM clone is the only solution which makes sense without spend a lot for special tools.


	Logged

Bitshifter

Full Member

Karma: +10/-7
Offline

Offline

Posts: 94

	Re: IMMO adapt problem MED 9.1 (login not accepted) « Reply #2 on: October 18, 2018, 07:53:29 PM »

Again learned something new about MED 9, thank you

I have IMMO data read from cluster via OBD. Is it possible to decrypt, copy (VIN, CSB, Login......), encrypt an write with BDM?


	Logged

k0mpresd

Hero Member

Karma: +146/-54
Offline

Offline

Posts: 1655

	Re: IMMO adapt problem MED 9.1 (login not accepted) « Reply #3 on: October 18, 2018, 07:58:17 PM »

avdi with vn002 works well for these.
read immo data from old, paste to new, done. takes about 1 minute to adapt new ecu to car, all via obd.


	Logged

Bitshifter

Full Member

Karma: +10/-7
Offline

Offline

Posts: 94

	Re: IMMO adapt problem MED 9.1 (login not accepted) « Reply #4 on: October 18, 2018, 09:35:14 PM »

But i don`t have the licence VN002.

I read that it is possible to reset the crypted Login/component protection. So i only have to plug the ECU in the car and it will learn VIN, CSB, Login.....is that right? Maybe somebody can help?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 05:43:08 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search