NefMoto > ECU Files > Original ECU Files > Original ECU File Requests > Looking for the manual trans ver of 06A906032LQ
Pages: [1]
« previous next »
Author Topic: Looking for the manual trans ver of 06A906032LQ  (Read 4270 times)
killpop
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« on: October 16, 2018, 08:52:17 AM »
I have an 03 GTI 1.8t AWP that I did a tip to manual swap on and I need to know what stock file I should flash to it. It came with 06A906032LQ 0005, I tried flashing 06A906032LP 0007 but it made it run like poo. Flashing back ori makes it run great but throws codes.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2801
« Reply #1 on: October 16, 2018, 03:03:20 PM »
was the file original or modified? any awp manual file should work fine. 032hs is the most common and there is many definitions floating around for it.
Logged
Giving your mom a tuneup
Carsinc
Sr. Member
****

Karma: +17/-2
Offline Offline

Posts: 447
« Reply #2 on: October 16, 2018, 09:58:23 PM »
yeah HS would be fine, and very popular.
Just search and you will find plenty of ori and def files
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2801
« Reply #3 on: October 17, 2018, 04:09:05 AM »
Quote from: Carsinc on October 16, 2018, 09:58:23 PM
yeah HS would be fine, and very popular.
Just search and you will find plenty of ori and def files
Wow I must have a echo.
Logged
Giving your mom a tuneup
killpop
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10
« Reply #4 on: October 17, 2018, 08:48:47 AM »
Just flashed a stock HS file and having same problem. Seems like ign is cutting out like it would with a dead coil pack. Happens about mid RPM range at part throttle. Still got some reading to do about logging but once I get that figured out, what should I log? Is there a standard set of diag parameters that would be the most helpful? I've also considered just trying to code out everything that is not necessary and see if and when the problem stops. Or what would be some other compatible firmwares I could try just to see if there is a change?   
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2801
« Reply #5 on: October 17, 2018, 11:48:10 AM »
Quote from: killpop on October 17, 2018, 08:48:47 AM
Just flashed a stock HS file and having same problem. Seems like ign is cutting out like it would with a dead coil pack. Happens about mid RPM range at part throttle. Still got some reading to do about logging but once I get that figured out, what should I log? Is there a standard set of diag parameters that would be the most helpful?
basic 4 cylinder profile is fine me7 logger. guessing wont get you any place
Logged
Giving your mom a tuneup
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 11:27:06 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 19 queries. (Pretty URLs adds 0s, 0q)