NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Launch control not working at all
Pages: [1]
« previous next »
Author Topic: Launch control not working at all  (Read 3128 times)
nemerty
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« on: October 19, 2018, 07:23:06 AM »
I just flashed my ecu and everything else seems fine exept the soft limiter is not working at all

changes i made:
10/16/2018 21:10:00  Scalar:    VNMX changed from 65.00 km/h (0x34) to 2.50 km/h (0x02).
10/16/2018 21:11:00  Scalar:    DNMAXH changed from 594.3 U/min (0x0949) to 50.0 U/min (0x00C8).
10/16/2018 21:11:32  Scalar:    ITNMXH changed from 50.380 s (0x13AE) to 0.000 s (0x0000).
10/16/2018 21:11:57  Scalar:    NMAX changed from 2350.0 RPM (0x24B8) to 3488.3 RPM (0x3681).
10/16/2018 21:13:44  Scalar:    TMOTNMX changed from 9.75 Grad C (0x4D) to -48.00 Grad C (0x00).
10/16/2018 21:14:33  Scalar:    TNMXH changed from 395.690 s (0x9A91) to 655.350 s (0xFFFF).

s4wiki says:
CWNMAXMD (CWDNMAX?) (8-bit) - Codeword Drehzahlbegrenzung (Codeword for RPM limiter). Change from 0 to 1

I dont have CWNMAXMD but I have CWDNMAX and its value is 88 so do i change it to 89.
the way i got 89 is 88 from hex to bin is 10001000 and if i change the 8th bit to 1 i get 10001001 which is 89 in hex.
I cannot find i list of those bits so not sure about the 8th bit :S
Or do i just change the 88 to 1, which would seem odd because it says from 0 to 1
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: October 19, 2018, 09:51:12 AM »
What ECU?

For ME7.1, bit 0 is the only one used (CWDNMAX not CWDNMAXD)

If you are seeing other bits set, they may not mean what you think.

You'll need the FR for your ecu or disassemble to find out how to disable DNMAX
« Last Edit: October 19, 2018, 09:53:28 AM by nyet » Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nemerty
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #2 on: October 19, 2018, 10:38:31 AM »
I got 06A906032HN.
Yeah im just reading about dissassemlying at the moment.
Logged
nemerty
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #3 on: October 19, 2018, 11:27:57 PM »
Might have found a problem with def files. I used ...._0001_public.xdf for making my changes and when i change to the other .xdf none of the right values are changed. Funny thing is that the car is running just fine :DD. Maybe ill make a new .bin by using the other .xdf and see if i get it to work...
Logged
Breacking
Jr. Member
**

Karma: +0/-7
Offline Offline

Posts: 31
« Reply #4 on: October 20, 2018, 01:49:05 AM »
Quote from: nemerty on October 19, 2018, 07:23:06 AM
I just flashed my ecu and everything else seems fine exept the soft limiter is not working at all

changes i made:
10/16/2018 21:10:00  Scalar:    VNMX changed from 65.00 km/h (0x34) to 2.50 km/h (0x02).
10/16/2018 21:11:00  Scalar:    DNMAXH changed from 594.3 U/min (0x0949) to 50.0 U/min (0x00C8).
10/16/2018 21:11:32  Scalar:    ITNMXH changed from 50.380 s (0x13AE) to 0.000 s (0x0000).
10/16/2018 21:11:57  Scalar:    NMAX changed from 2350.0 RPM (0x24B8) to 3488.3 RPM (0x3681).
10/16/2018 21:13:44  Scalar:    TMOTNMX changed from 9.75 Grad C (0x4D) to -48.00 Grad C (0x00).
10/16/2018 21:14:33  Scalar:    TNMXH changed from 395.690 s (0x9A91) to 655.350 s (0xFFFF).

s4wiki says:
CWNMAXMD (CWDNMAX?) (8-bit) - Codeword Drehzahlbegrenzung (Codeword for RPM limiter). Change from 0 to 1

I dont have CWNMAXMD but I have CWDNMAX and its value is 88 so do i change it to 89.
the way i got 89 is 88 from hex to bin is 10001000 and if i change the 8th bit to 1 i get 10001001 which is 89 in hex.
I cannot find i list of those bits so not sure about the 8th bit :S
Or do i just change the 88 to 1, which would seem odd because it says from 0 to 1

Good day. If you want Launch contro is not it easier to use the program
Launch.exe? The program is on this forum. Launch.exe for 06A906032HN works well
Logged
nemerty
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #5 on: October 21, 2018, 06:56:01 AM »
Thanks very much.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 09:30:06 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)