Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
Few questions???
Pages: [
1
]
« previous
next »
Author
Topic: Few questions??? (Read 2561 times)
Jozua
Newbie
Karma: +1/-1
Offline
Posts: 24
Few questions???
« on: October 21, 2018, 06:20:57 AM »
Im new in all of this from South Africa and Afrikaans so be patient.
1. Which ecus can be cross flashed with 8E0909518AT? Cant find xdf.
2. Somewhere I read about difficulty reading some of the Audi A4 B6 1.8T ecus cant get it to read with borrowed Rosstech cable. Any tips or tricks?
3. Are Xdf's compatible to other bins that are compatible to be cross flashed?
4. Best way and reference to make my own xdf? I do have a kp file to use.
Thanks for a great site Im been reading for days and cant get enough.
Logged
_nameless
Hero Member
Karma: +342/-466
Offline
Posts: 2800
Re: Few questions???
« Reply #1 on: October 21, 2018, 06:31:50 AM »
The north american 518ak share many map locations and I do believe version 004 of the am lines up exactly with the 518at. For what it's worth you can cross flash to the North American 518ak withoit problem. Using nefmoto flasher you can use a ft232rl chipset obd to usb clone vcds / kkl cable or a real rosstech cable in dumb mode with nefmoto flasher. Look on eBay and find yourself a clone choppy of mpps v18. V18 is by far the best bang for your buck. If you flash with nefmoto and you have a bad write you will not be able to recover the bricked ecu. With mpps you can bootmode recover with the same cable. Also v18 writes Eeprom too witch you'll most likely use down the line
Logged
Giving your mom a tuneup
Jozua
Newbie
Karma: +1/-1
Offline
Posts: 24
Re: Few questions???
« Reply #2 on: October 21, 2018, 07:34:18 AM »
Thanks alot the current cable do have the 232rl chip did al the drivers and vpc ect. No go ftdi echo fault. Will try other cables.
am sw 0004 are the bfb b7 model. Thanks. Got 2 x A4 b6 1.8T 140kw wife's want to do Stage 1 MINE stage 3+
Will do as you suggested.
Where did u find the knowledge about the ecu compatibility and crossflashing?
Logged
_nameless
Hero Member
Karma: +342/-466
Offline
Posts: 2800
Re: Few questions???
« Reply #3 on: October 26, 2018, 02:42:18 AM »
Quote from: Jozua on October 21, 2018, 07:34:18 AM
Where did u find the knowledge about the ecu compatibility and crossflashing?
Trial and error
Logged
Giving your mom a tuneup
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 25, 2024, 04:37:34 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
