Dev Blog
Forum
Wiki
About
NefMoto
>
Noob Zone
>
Noob Questions
(Moderator:
turboat
) >
Upgraded throttle body - ME7.5.10
Pages: [
1
]
« previous
next »
Author
Topic: Upgraded throttle body - ME7.5.10 (Read 2768 times)
medinton
Newbie
Karma: +0/-0
Offline
Posts: 1
Upgraded throttle body - ME7.5.10
« on: October 24, 2018, 12:51:40 PM »
Bosch ME7.5.10
Software#: 036997032Q
Software ver: 9731
Hi everyone,
I have upgraded my throttle body to a non-VAG one. Manufacturer, plug and flange is identical to my AUB manifold. Everything is OK in VCDS, except for the adaptation which fails. I have tried swapping the interior of the TB but they aren't interchangable.
The adapation returns an error: 17987 - Throttle Body Controller (J338) - Adaptation Not Started - 001 - Upper Limit Exceeded.
If I clear the DTCs, the idle is rough and when going over a certain speed, the car goes into limp mode, and throws a couple of non-plausible signals including the throttle position.
When checking in VCDS the throttle valve angle is the only difference. OEM value 1 is 18% and value 2 is 82%. Replacement value 1 is 18 and value 2 is 76%.
My question is, is it possible to fix this through a map or should I just disable these DTCs and hope that the car will run?
Logged
Detund
Newbie
Karma: +0/-1
Offline
Posts: 17
Re: Upgraded throttle body - ME7.5.10
« Reply #1 on: November 05, 2018, 03:23:02 PM »
To Attempt adaptations its always better to work with bigger interfaces, like DS150E delph etc.
vcds does the work but this could also be an interface problem as well,
also,
The proccess of adaptation must always meet certain conditions like
Coolant temperature above 80C
these as far as im concearned about these things with my humble experience over 15 years at workshop as an electrician,
technicaly speaking only, i have no experience with programming n stuff
PS: witch throttle body was the replacement? was that VDO too? critical stuff!
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
July 07, 2025, 11:14:01 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...