NefMoto > Technical > Diagnostics > S4 B5: 17743/P1335 - Engine Torque Monitor 2: Control Limit Exceeded
Pages: 1 2 [3]
« previous next »
Author Topic: S4 B5: 17743/P1335 - Engine Torque Monitor 2: Control Limit Exceeded  (Read 42939 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #30 on: May 30, 2012, 09:33:18 AM »
Quote from: rnagy86 on May 30, 2012, 09:31:46 AM
Oh that makes sense, so I guess the MTX tuner-pro checksum plugin cannot handle it. I guess I should contact them so that they can look into the issue.
I will try your file as soon my galetto cable arrives so I can revive the ECU if needed. Is it going to be possible to modify your file (other maps than the *_UM ones) safely without freaking out the ECU again with a wrong checksum?

Thanks


Well, I'm using WinOls so I've fixed my chechksums, but if you modify maps again then you might experience same thing
Logged
ME7Tuner Wizard
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #31 on: May 30, 2012, 10:13:11 AM »
Quote from: masterj on May 30, 2012, 09:33:18 AM
Well, I'm using WinOls so I've fixed my chechksums, but if you modify maps again then you might experience same thing

Well i guess i will have to try and error Wink On the other hand i will look into the me 7 doc to see what isbactually causing this dtc.
Logged
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #32 on: May 31, 2012, 06:51:34 AM »
I've managed to do some logging today (https://docs.google.com/spreadsheet/ccc?key=0AhrG40GHpr-hdDhzdEkyWllmRGkwLUR6czBaRGo5dnc#gid=0)
and it seems that i get into limp mode with torque monitor 2 when my IgnReatrdKnockControl (wkr_1-6) gets below zero.
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #33 on: May 31, 2012, 06:58:46 AM »
Quote from: rnagy86 on May 31, 2012, 06:51:34 AM
I've managed to do some logging today (https://docs.google.com/spreadsheet/ccc?key=0AhrG40GHpr-hdDhzdEkyWllmRGkwLUR6czBaRGo5dnc#gid=0)
and it seems that i get into limp mode with torque monitor 2 when my IgnReatrdKnockControl (wkr_1-6) gets below zero.

Every tuned car is experiencing small knock unless you have very retarted timing... And that shouldn't put you into limp... Look for different factors
Logged
ME7Tuner Wizard
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #34 on: May 31, 2012, 07:00:49 AM »
Quote from: masterj on May 31, 2012, 06:58:46 AM
Every tuned car is experiencing small knock unless you have very retarted timing... And that shouldn't put you into limp... Look for different factors

Ok so a negative value is okay there, i though it should only be positive.
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #35 on: May 31, 2012, 07:05:24 AM »
Quote from: rnagy86 on May 31, 2012, 07:00:49 AM
Ok so a negative value is okay there, i though it should only be positive.

Retarding spark means negative numbers Wink It only occurs when knock sensor pick up knock
Logged
ME7Tuner Wizard
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #36 on: May 31, 2012, 07:06:39 AM »
Quote from: masterj on May 31, 2012, 07:05:24 AM
Retarding spark means negative numbers Wink It only occurs when knock sensor pick up knock
ok now it makes sense  Grin
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #37 on: May 31, 2012, 08:43:15 AM »
You're nowhere NEAR logging anything that causes torque intervention.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367
« Reply #38 on: June 01, 2012, 06:03:06 AM »
Well I did some logging again with way more info and it seems that my EngineLoad is higher than EngineLoadRequested for a long enough time to cause the intervention. It happens right at the end of the logfile before I shut the engine down. Any ideas?
Thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #39 on: June 01, 2012, 08:35:17 AM »
Did you check s4wiki? There are lots of references to the various torque monitoring threads/messages here.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: 1 2 [3]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 05:19:33 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)