Pages: [1]
Author Topic: nostrum injector med17.5  (Read 3782 times)
luigicmd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: November 21, 2018, 06:52:07 AM »

Hi at all,
i need configure nostrum injector in ecu med17.5 , if any one have experience with this injector please help me Smiley
Logged
NBR
Full Member
***

Karma: +20/-7
Offline Offline

Posts: 79


« Reply #1 on: November 22, 2018, 04:23:53 AM »

I didn't buy them, but when I emailed them enquiring about it they said they will give all the necessary tuning data for calibration.

Did you email them?
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #2 on: November 22, 2018, 09:23:22 PM »

i m tuning a few cars with these injectors.
Logged
luigicmd
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #3 on: December 17, 2018, 07:15:09 AM »

Hi vdubnation,

if send file you can make configuration for nostrum injecotor ?

Thanks
Logged
Pr3muToS
Full Member
***

Karma: +1/-4
Offline Offline

Posts: 65


« Reply #4 on: January 21, 2019, 03:01:55 AM »

i also would need help with them.

got them for testing on a BT setup, but the driver information they provide is a joke...

I need them in MED9.

But EA888 ones and EA113 ones are the same, just the spacers for the cylinder head is a bit different and for ea113 they provide connection adapters.



Logged
Pr3muToS
Full Member
***

Karma: +1/-4
Offline Offline

Posts: 65


« Reply #5 on: February 06, 2019, 08:58:32 AM »

got new infos from nostrum but these doenst work also.

anyone who could help?
Logged
Pr3muToS
Full Member
***

Karma: +1/-4
Offline Offline

Posts: 65


« Reply #6 on: February 14, 2019, 03:07:40 AM »

found out we need to drive them @ 20bars high pressure at idle, but this worked only 1 time.
now high pressure is always target 30 bars, actual 30 bars even if 20 bars are programmed?
anybody knows why? MED9
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)