How to calculate TEMIN?

Pages: 1 [2]

« previous next »

Author

Topic: How to calculate TEMIN? (Read 18804 times)

NOTORIOUS VR

Administrator
Hero Member

Karma: +58/-7
Offline

Offline

Posts: 1056

	Re: How to calculate TEMIN? « Reply #15 on: May 14, 2012, 09:39:39 AM »

Just to give my .02

Leaving TEMIN @ the default 0.5ms would cause rich conditions under ultra light load for me (ie just holding the throttle pedal just enough so that the car doesn't go into overrun).

Lowering TEMIN to 0.12 solved that issue.

That was running ID1000's @ 4 BAR (around 1170cc)


	Logged

SCHNELL ENGINEERING BLOG · STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning

prj

Hero Member

Karma: +922/-429
Offline

Offline

Posts: 5862

	Re: How to calculate TEMIN? « Reply #16 on: May 17, 2012, 06:13:51 AM »

Yup, that's exactly what I was talking about.


	Logged

PM's will not be answered, so don't even try.
Log your car properly.

ABCD

Full Member

Karma: +4/-0
Offline

Offline

Posts: 78

	Re: How to calculate TEMIN? « Reply #17 on: June 25, 2012, 08:16:42 PM »

Hi all,

One basic doubt:
If i know flow rate of injector and engine volume, then how to calculate TEMIN?

Thanks


	Logged

dragon187

Full Member

Karma: +13/-15
Offline

Offline

Posts: 106

	Re: How to calculate TEMIN? « Reply #18 on: June 05, 2016, 09:13:03 AM »

Hi
What about TEMIN VA?
Is this needed for deceleration?


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: How to calculate TEMIN? « Reply #19 on: June 05, 2016, 01:00:52 PM »

Quote from: dragon187 on June 05, 2016, 09:13:03 AM

Hi
What about TEMIN VA?
Is this needed for deceleration?

teminva is when engine cold...


	Logged

BLK01S4

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: How to calculate TEMIN? « Reply #20 on: June 06, 2016, 08:41:04 AM »

EV14 60# here. TEMIN = 0.299 MS . Works great.


	Logged

prj

Hero Member

Karma: +922/-429
Offline

Offline

Posts: 5862

	Re: How to calculate TEMIN? « Reply #21 on: August 02, 2016, 11:29:17 AM »

Quote from: littco on June 05, 2016, 01:00:52 PM

teminva is when engine cold...

TEMINVA is for the intake manifold wall film model, it is the minimum injection time during deceleration enrichment.


	Logged

PM's will not be answered, so don't even try.
Log your car properly.

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

May 23, 2024, 11:01:17 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search