Nissan GT-R injectors

Pages: [1]

« previous next »

Author

Topic: Nissan GT-R injectors (Read 3591 times)

yakou

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Nissan GT-R injectors « on: December 17, 2018, 08:27:10 AM »

Hi guys!

Really need your opinions and advices.

I build 2.7 allroad on rs6 ko4 turbos, and I bought injectors Denso from nissan gt-r r35.

the choise is due to good performance and good cone (12 nozzles).

So, is anybody use it on 2.7 or I'm first idiot?)

Google didn't have a lot of info about this injectors, just 570 cc, and I can't find any datasheet.

Best reguards
Yakov


	Logged

nyet

Administrator
Hero Member

Karma: +604/-166
Online

Online

Posts: 12233

	Re: Nissan GT-R injectors « Reply #1 on: December 17, 2018, 09:29:40 AM »

570cc is kinda small, which is probably why nobody has used them.


	Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.

yakou

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Nissan GT-R injectors « Reply #2 on: December 17, 2018, 10:33:45 AM »

Quote from: nyet on December 17, 2018, 09:29:40 AM

570cc is kinda small, which is probably why nobody has used them.

well, 570 cc with 3 bar, so about 660 cc with 4 bar. Enought for my requests

There is many typical projects with 550 cc bosch ev14 and k04 in my country (Russia), about 500 hp, I decide be more individual

think that good cone can do more homogeneous fuel charge (sorry for my english).

hope that anybody will can tell me some info (voltage offset, fkkvs)

best reguards


	Logged

jcsbanks

Full Member

Karma: +17/-3
Offline

Offline

Posts: 126

	Re: Nissan GT-R injectors « Reply #3 on: December 17, 2018, 12:55:28 PM »

It is years since I worked on R35 GTR but the stock ECU latency was about 0.9ms and about the same gradient per volt. Sorry I cannot remeber if the latency value was at 12 or 14.4V.


	Logged

Piar

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 28

	Re: Nissan GT-R injectors « Reply #4 on: December 17, 2018, 11:46:42 PM »

We have used it on our drift nissan 200sx project, it have 2 td04 turbos from impreza wrx and made solid 450 whp on completely stock engine.
If you are not aiming for more than 450 hp - you can use it, it will give you perfect idle, low fuel consumption and will last long


	Logged

yakou

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: Nissan GT-R injectors « Reply #5 on: December 18, 2018, 08:27:21 AM »

Quote from: Piar on December 17, 2018, 11:46:42 PM

Great! You're from Kazahstan? I saw some blue SX on drive2 with 2.7t.

Can you tell me please tvub and fkkvs parameters? For injector migration its enought or something else?
Are u use 4 bar regulator?

P.s I found some data on gtr-heritage:

Flow 570cc;

Latency
8v - 2.858 ms
9v - 2.678 ms
10v - 2.499 ms
11v - 2.319 ms
12v - 2.139 ms
13v - 1.960 ms
14v - 1.780 ms;

Injector minimum open time 1.83 ms;
Injector lag time offset 0.890.


	Logged

Piar

Jr. Member

Karma: +0/-3
Offline

Offline

Posts: 28

	Re: Nissan GT-R injectors « Reply #6 on: December 18, 2018, 10:33:54 AM »

Yes, I'm from Kazakhstan
This car is working on LINK ECU with traditional fueling ( 3d table with injector opening time) model
So there is NO injector flow
But we use 4bar regulator
and latency is 1.1ms at 14v in our case


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 15, 2024, 10:53:28 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search