Pages: [1]
Author Topic: Purchased a kkl from well known vag website  (Read 2323 times)
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« on: December 20, 2018, 11:34:35 AM »

Alright I've run out of options. I purchased a kkl from ECS tunings website because I've read on here about all the problems people have run into buying cables off eBay.  So far I've had 0 luck trying to get this cable to work and it's been almost a week now. I tried the drivers that are given with the cable to no avail. Uninstalled everything and reinstalled numerous times. Will anyone help me get this thing working and I'll compensate you for your time?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #1 on: December 20, 2018, 12:00:12 PM »

You'll have to give us more than that. What does it show up as in device manager? What drivers are you trying to install? What program are you trying to use it with?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #2 on: December 20, 2018, 03:26:54 PM »

Take it apart. Most likely has a CH chip inside... trust me I had the same issue. Got an MPPS today, hopefully it works.

But yes also look in device manager, that will atleast give some info about it. You can check ID of it if it shows up atleast in properties.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)