Hello,

so today I actually tried to change/look into changing my timing back to normal, and thanks to Marty I've got a mappack to use with my 8D0906018Q ecu.

Now the mappack contains the actual timing map properly but not the axes, so i got minimal experience in winols and i tried to look up the axis in decimal view. It should be 16 x12 but I couldnt find anything relevant "close" in the hex dump. Now i looked up the FR and it seems that the axes should be RPM and KW as in crankshaft rotation? I am not too sure what the german word means.
How can I find these axes, or maybe can I use one that is used say in another map ?

Thank you.

Bump, managed to get a hang of this and found the following maps

KRKTE
nmax
nmax2
klfl

so far but klfl doesnt have the axis adress in the same place as the comparsion file. I am having a hard time finding them when they arent next to map. I tried searching for the axis values but it doesnt appear, so it means the axis data must be different, any help please ?

Thank you. side note: the 018p mappack that i m using for comparsion krkte is around 0.10 , which equals to 300cc ish inj, where as the stock ones are about 200 or so, why is that , the file is stock.