Pages: [1]
Author Topic: XDF for eeprom bins editor recommendations  (Read 4335 times)
dclifford40
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« on: January 12, 2019, 11:03:19 AM »

I managed to figure out how to get my eeprom.bin from the ecu
Accustomed to looking at .bin files in tunerpro,,but no xdf file that I can find here yet

So for this and cluster files I guess i need a bin editor,,then checksum (thats here already, have it)

google is not helping so much,,hex editors are out there..

what is best?
Logged
dclifford40
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #1 on: January 12, 2019, 01:46:40 PM »

I found NEO editor,,now trying to figure out the checksum and upload to my ECU
Logged
Dave9n3
Sr. Member
****

Karma: +26/-0
Offline Offline

Posts: 284


« Reply #2 on: January 12, 2019, 03:06:04 PM »

I personally use HxD which is free and has some nice functions. Simple to use also.

If you're doing an immo off for a me7 then look for 95040tool, it is on the forum somewhere and is very useful for turning immo off, correcting checksums and checking that p0601 code isn't present
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)