Hi,
I want remove SAI from my A3 8L 2003 with AUM engine.

I can't find proper XDF file for my ECU bin 06A906032HJ 0002

Can anyone provide 100% working XDF or tell me adresses of MSLUB and MSLBAS in 06A906032HJ 0002?

I alredy thrown Combi Valve, so now i must disconnect pump (now hoses from pump are unattached under the hood)

Thank you. I guess the location is the same for OA906032HF 0005, as i checked and compared the addresses and the binaries are the same. Can you confirm and also give me a further confirmation of the location for CWKONABG? I have coded out SAI and it is working ok. I have tried coding out the catalytic with the sensor still plugged in. I did this through ESKONF (location is right) and CWKONABG (I am not sure if i got the location right). However I am having a challenge with the Catalytic code out. Readiness bits are all passed including for catalytic but I still get efficiency below threshold dtc P0420. I want to try the MLSUB/MSLBAS method.
I have attached files including current SAI/Cat code out bin.
Very grateful in advance.
Niijohnnie
('02 Golf 4 1.8T turbo)
NB/ I had also tried to set CDKAT  to 0 (possible to confirm whether i had the address for it right?)

This is the original. pls.

16804 - Catalyst System; Bank 1
            P0420 - 35-00 - Efficiency Below Threshold

Disabling SAI will not remove this error.

MSLUB - 1A748
MSLBAS - 1838F

Your catalyst and the second probe are removed?
I can set this to you.

Will you remove the catalyst from the car?

No. I want to leave every thing in place. but don't want the 'catalyst below efficiency error'

Thank you, Sir.
@Kacza: This is just a feedback. I was finally able to get time to upload the bin file over the weekend. The catalyst inefficiency error is solved. However the readiness for oxygen sensor has been unable to set even after 3 days of driving. I guess the current rear O2 code out has affected the diagnostic function for the oxygen sensors, as indicated in some of the notes i have read here. I will find time to play with your file and tweak it accordingly. Thanks for the head start.