Pages: [1]
Author Topic: IMMO IV canbus messages  (Read 235 times)
H2Deetoo
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 166


« on: February 01, 2019, 11:37:32 AM »

Hi guys,


Has any of you ever done some research on the canbus messages uses by the ecu <-> cluster immobilizer handshake?
From what I know canid's 0x010 and 0x011 are used, but I haven't got a complete overview yet.


Regards,
H2Deetoo
Logged
simple2me
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #1 on: April 17, 2019, 07:07:44 AM »

how many different versions of immo iv are there? Ive seen two, Immo 4a and immo 4c.   
Logged
H2Deetoo
Full Member
***

Karma: +10/-0
Offline Offline

Posts: 166


« Reply #2 on: April 17, 2019, 07:26:02 AM »

What would be the difference between 4a and 4c then?

I focus mainly on VAG PQ platform which uses immo 4, not sure if that would be 4a or 4c ...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)