timing correction after log during WOT

Pages: 1 [2]

« previous next »

Author

Topic: timing correction after log during WOT (Read 9090 times)

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: timing correction after log during WOT « Reply #15 on: February 15, 2019, 07:38:45 AM »

Yes, it was unneccesary to make a new thread, and I asked this in your last post and didnt understand your reply but now i do i guess, you set it up so it shows the difference between the modified value and the stock value right? IMO it would be better if you reverted it to default to show the actual timing values instead of the difference.

Also show the actual timing angle value and the retard groups in the logs.


« Last Edit: February 15, 2019, 07:45:15 AM by Blazius »	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: timing correction after log during WOT « Reply #16 on: February 15, 2019, 09:34:56 AM »

Also, get ME7L working.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

dal

Full Member

Karma: +6/-7
Offline

Offline

Posts: 210

	Re: timing correction after log during WOT « Reply #17 on: February 15, 2019, 11:02:34 AM »

I need to get this working for my car URGENT.


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: timing correction after log during WOT « Reply #18 on: February 15, 2019, 05:49:58 PM »

Quote from: andredalmolin on February 15, 2019, 11:02:34 AM

I need to get this working for my car URGENT.

wot


	Logged

pieros_net

Jr. Member

Karma: +1/-0
Online

Online

Posts: 39

	Re: timing correction after log during WOT « Reply #19 on: February 17, 2019, 11:33:52 AM »

Hi guys,
just an update about my problem.

I decrease the retard to around 2-3 degree at just one or two cyclinders only by:
1) a few additional fuel, i'm right now around lambda 0,8 between 160% to 191% load
2) using of 100 octane fuel

thank you every body!


	Logged

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: timing correction after log during WOT « Reply #20 on: February 17, 2019, 01:47:49 PM »

Quote from: pieros_net on February 17, 2019, 11:33:52 AM


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: timing correction after log during WOT « Reply #21 on: February 17, 2019, 04:40:32 PM »

Quote from: pieros_net on February 17, 2019, 11:33:52 AM

2) using of 100 octane fuel

If you plan on always using race gas, you will need to retune timing entirely.

If you plan on only using race gas sometimes, you should not tune for pump gas with race gas. Really really terrible idea.


	Logged

pieros_net

Jr. Member

Karma: +1/-0
Online

Online

Posts: 39

	Re: timing correction after log during WOT « Reply #22 on: February 18, 2019, 02:25:34 AM »

Quote from: nyet on February 17, 2019, 04:40:32 PM

If you plan on always using race gas, you will need to retune timing entirely.

why I have to retune timing if right now with stock values map and 100 octane fuel I just get down the retard near to 0?

Quote

If you plan on only using race gas sometimes, you should not tune for pump gas with race gas. Really really terrible idea.

I'm fully agree with you! sure I will use everytime 100 oct fuel, in case I must review direct the timing map


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 11:54:36 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search